Bosch Autodome 300 VG4-324-CCS/VG4-324-CTS 36x D/N In-ceiling PTZ Security Camera System is the revolutionary new modular concept in dome security cameras. More than just a series of security  cameras, it’s a dome platform built around a system of intelligent, interchangeable modules that allow you to update camera functionality quickly and costeffectively. Using common components lets you install a basic camera system today and migrate to a more advanced version tomorrow – without having to replace the entire dome, thus protecting your initial investment.

Interchangeable modules

The entire Bosch AutoDome modular security camera system is based on five interchangeable modules: the CPU, camera, housing, communications, and power supply. Simply swap one of Bosch Autodome 300 VG4-324-CCS/VG4-324-CTS 36x D/N In-ceiling PTZ Security Camera System has interchangeable modules and can quickly upgrade from analog to IP, color to day/night, or add motion detection. Never before have you had the ability to adapt a security system to your changing needs this quickly or inexpensively.
By using the same housing components, all installations have a consistent look, and observers have no idea which type of camera (if any) is watching over them. This unique, modular design also gives you the flexibility to move cameras between different housings when special coverage is needed, or as site plan requirements change. For example, an 18x PTZ camera over a specific area could easily be “hot-swapped” to a 26x or 36x day/night without removing the power. Migrating from a basic dome to one with advanced features such as AutoTrack II intelligent tracking can be done quickly and easily, without requiring dome removal or rewiring. Bosch Autodome 300 VG4-324-CCS/VG4-324-CTS 36x D/N In-ceiling PTZ Security Camera System Ethernet communications module allows you to add IP functionality while maintaining connectivity to existing analog inputs and outputs.

• High-speed PTZ dome
• Fully interchangeable CPUs, cameras, housings, communications, and mounts
• 540TVL 36x day/night night camera with 128x wide dynamic range
• Optional hybrid operation provides simultaneous analog (coax) and IP (MPEG-4) connectivity
• Advanced privacy masking
• Advanced alarm control with rules engine
• UTP transmission standard on all analog models
• Cable compensation extends cabling distances
• Multi-protocol capable

300 Series highlights

Bosch Autodome 300 VG4-324-CCS/VG4-324-CTS 36x D/N In-ceiling PTZ Security Camera System includes support for 18x, 26x,and the industry-leading 36x day/night PTZ cameras, and several advanced features – including an alarm management “rules” engine and privacy masking. The Bosch Autodome 300 VG4-323-ECS 26x Day/Night Outdoor PTZ Security Camera System supports a variety of standard and optional video and data transmission methods, including Bilinx (over coax and UTP), fiber, and even TCP/IP over Ethernet. Remote control, configuration, and firmware updates can also be performed over these cables, offering you unparalleled control of your cameras. Cable compensation provides extended coaxial and UTP distance runs while preventing the image quality degradation caused by signal losses from long cable lengths.

The optional IP Communications Module has hybrid functionality to protect your current analog technology investment while providing a clear and stable migration path to fully digital, IP-based solutions. This allows you to move to IP video at your own pace – all at once or one camera at a time. And since all Bosch Autodome 300 VG4-324-CCS/VG4-324-CTS 36x D/N In-ceiling PTZ Security Camera System modules are completely interchangeable, there is no need to replace expensive components (e.g., cameras) or labor-intensive components (e.g., mounts and housings).

Bosch Autodome 300 VG4-324-CCS/VG4-324-CTS 36x D/N In-ceiling PTZ Security Camera System in the security industry.

High-performance PTZ day/night cameras

Image control and quality are integral aspects of any PTZ dome system, and the Bosch Autodome 300 VG4-324-CCS/VG4-324-CTS 36x D/N In-ceiling PTZ Security Camera System delivers. The Autodome 300 Series is available with a choice of 18x, 26x, or an industry-leading 36x optical zoom lens, and all 500i Series systems offer a full 12x digital zoom. The 18x and 26x cameras provide 470/460 TVL (NTSC/PAL), and the 36x camera provides a full 540 TVL of horizontal resolution for outstanding clarity and image detail. The 36x camera also incorporates technology that dramatically improves the wide dynamic range by 128 times. Also known as WDR (wide-dynamic range), it results in clear image reproduction in extreme high-contrast environments. The patented AutoScaling (proportional zoom) and AutoPivot (automatically rotates and flips the camera) ensure optimal control.
Day/night capabilities and outstanding sensitivity make 300 Series cameras exceptional performers in all lighting conditions. In low light, these cameras automatically switch from color to monochrome by removing the IR filter to boost infrared illumination sensitivity, while maintaining superior image quality. For operation in the darkest conditions, the SensUp control feature automatically extends the shutter speed to as much as one second. This increases sensitivity by more than 50 times.
With super-quick, 360° per-second pan and tilt speeds, the Bosch Autodome 300 VG4-324-CCS and VG4-324-CTS 36x D/N In-ceiling PTZ Security Camera System outperforms other domes in its class. The 300 Series supports 99 pre-positions and two styles of guard tours: preset and record/playback. The preset tour can handle up to 99 pre-positions with a configurable dwell time between pre-positions; the order and frequency with which each preset is visited can be customized. The Bosch AutoDome 300 Series also provides support for two recorded tours, which have a combined duration of 15 minutes of movement. These are recorded macros of an operator’s movements, including pan, tilt, and zoom activities, and can be played back continuously. Supported menu languages include: English, French, German, Spanish, Portuguese, Italian, Dutch, and Polish.

Alarm management

The Bosch AutoDome 300 Series takes alarm handling to new levels of flexibility and power.

Inputs and outputs

The Bosch Autodome 300 VG4-324-CCS/VG4-324-CTS 36x D/N In-ceiling PTZ Security Camera System Series PTZ Camera can handle seven alarm inputs:

two of these are analog inputs that can be programmed for EOLR (End-of-Line Resistor) supervision whenever true security applications require it. These inputs enable the dome to “sense” if the contact is opened or closed and whether the wire has been tampered with (either by being cut or shorted). In addition, the Bosch AutoDome 300 Series PTZ System supports four outputs: one relay rated at two amps and three additional open collectors for driving external devices. Each can be programmed individually.

Advanced alarm control

This new concept in flexibility goes beyond simple alarm handling. Advanced alarm control uses sophisticated rulesbased logic to determine how to manage alarms. In its most basic form, a “rule” could define which input(s) should activate which output(s). In a more complex form, inputs and outputs can be combined with pre-defined or userspecified
keyboard commands to perform advanced dome functions. There is virtually no limit to the number of combinations that you can program, making the standard software in the dome ready for any application.

Superior privacy masking

The Bosch AutoDome 300 Series allows for a total of 24 individual privacy masks, with up to eight displayed in the same scene. Unlike conventional privacy masks, these can each be programmed with three, four, or even five corners to cover more complex shapes. As the camera is zoomed each mask changes size smoothly and quickly ensuring that the covered object cannot be seen. You also have a choice of colors: black, white, and blurred. Blurred comes in handy when privacy is an issue, but determining the presence of motion is still required.

Optional hybrid analog/IP operation

Optional hybrid connectivity allows the AutoDome to simultaneously stream IP video across a local or wide area network, and CVBS video via coaxial cabling to support existing analog equipment. Network video streams are sent over IP networks and can be viewed with the Bosch DiBos Digital Video Recorder or on a PC running VIDOS video management software. Alternatively, a Bosch IP video decoder can be used to display the video on an analog CVBS or VGA monitor. For maximum accessibility, video can be viewed using a Web browser. The BNC connection provides direct input to a conventional analog matrix switcher or DVR, further enhancing AutoDome’s viewing and recording flexibility. Hybrid operation allows simultaneous dome control over the network and via biphase analog controllers.

MPEG-4 encoding

AutoDome’s IP Communications Module uses the latest MPEG-4 compression technology to provide DVD-quality 4CIF video at frame rates up to 25/30 PAL/NTSC images per second (IPS). The IP module also leverages bandwidth throttling and multicasting capabilities to efficiently manage bandwidth and storage requirements while delivering the best possible image quality and resolution.

Functions

Tri-streaming video

Bosch’s innovative tri-streaming feature enables AutoDomes equipped with the optional IP communications module to generate two independent MPEG-4 streams and a JPEG stream simultaneously. This feature allows you to stream high-quality images for live viewing while recording at a reduced frame rate, and at the same time, stream JPEG images to a remote PDA device.

Unsurpassed reliability

AutoDome builds on Bosch’s 10-plus years of experience designing and manufacturing dome camera systems. All Bosch AutoDome pendant housings (indoor and outdoor) are rated to provide IP66 protection. Outdoor EnviroDome housings provider an operating temperature range down to -40°C (-40°F). The optional “XT” extreme temperature kit allows AutoDome to operate in temperatures down to -60°C (-76°F), ensuring reliable operation in even the harshest environments.
All housings come standard with a rugged polycarbonate bubble, recessed set screws, and a recessed bubble latch to reduce the chance of damage from vandalism. Inside the dome, the power, data, and video are all protected against unexpected surges of power.

Ease of installation and servicing

Bosch’s innovative software, the Configuration Tool for Imaging Devices (CTFID), allows operators or technicians to control the PTZ, change camera settings, and even update firmware from virtually anywhere without need for additional wiring. For the new Ethernet versions, an embedded Web server lets the installer access all the user settings, make camera adjustments, and update firmware via a standard Web browser.
Bosch AutoDome’s innovative design simplifies installation and servicing. Bosch AutoDome PTZ reduces maintenance costs because you can replace individual modules instead of entire camera assemblies. Simply pop out the old module and slide in the new: it’s almost as easy as changing a light bulb. All tethers have been replaced with hinges, making installation and servicing safer and easier. You can even access the built-in power supply without taking down the dome.
The Bosch AutoDome PTZ 300 Series has advanced built-in diagnostics to simplify service and minimize downtime. Using the On Screen Display (OSD), a technician can quickly and easily check critical parameters (such as internal temperature and input voltage level) to verify that the dome is functioning within acceptable operating limits. If video is not present, a local inspection of three diagnostic LEDs at the camera site can identify the presence of video and control data.
   

BOSCH AUTODOME 300 INDOOR IN-CEILING PTZ System MODELS (24 VAC)   

VG4-324-CCS 300 SERIES PTZ 36X D/N NTSC, IN-CEILING, 24 VAC, ANALOG CLEAR BUBBLE
VG4-324-CTS 300 SERIES PTZ 36X D/N NTSC, IN-CEILING, 24 VAC, ANALOG TINTED BUBBLE