|
Pelco CM9760-CXTA Coaxitron interfaces Pelco’s matrix switchers that use P
protocol with Pelco’s receivers that use Coaxitron® protocol for command and control functions.
The CM9760-CXTA Coaxitron will also interface Pelco’s digital video recorders that use D protocol with Pelco’s receivers that use Coaxitron protocol for command and control functions. CX9000, Peclo Legacy®, Pelco Intercept®, Pelco Spectra®, and Pelco Esprit® receivers can be used with the CM9760-CXTA Coaxitron.
The 32 BNCs are looped inside the unit. Each BNC on the top row is paired with a BNC on the bottom row. This allows either the top or bottom BNC to be selected as an input or output to communicate to or from the receiver.
The rear of the CM9760-CXTA has input and output connectors that allow two translator units to be cascaded. This makes 32 Coaxitron ports available that can be controlled from one RS-422 communication port on a System 9700 Series CC1.
The eight-position DIP switch allows the protocol for the BNC inputs to be set to either 15 bits or 32 bits. The DIP switch is also used to configure Pelco P or Pelco D protocol, and data rates.
Pelco CM9760-CXTA Main Features:
- Allows Coaxitron Control from Any RS-422 P or D Protocol Device
- 16 Looping Video Inputs Allow Easy Connection Between Switch and Security Cameras
- Send PTZ Control Commands on a Camera’s Video Cable
- Fits a Standard 19-Inch Rack Mount
| 
