| The Pelco ERD2200 Receiver operates
all of Pelco's fixed speed pan/tilts and domes.
This receiver offers removable screw terminal
connectors for quick and easy installation.
Power and communication indicators are
provided for troubleshooting purposes.
The ERD2200 works with
standard and extended Coaxitron controllers,
including the CM6700/7500/8500/9500,
KBD9000, MPT9000/9500, and MX4000.With Coaxitron control, pan/tilt and lens
control signals are transmitted over the video
coaxial cable, saving wiring costs. The control
data is superimposed on the vertical blanking
interval of the video signal.
Standard features include pan/tilt control
(including auto and random scan), camera
power, lens control (zoom, iris, and focus), and
two auxiliary outputs. The receiver also can be
used with the LRD41TLC Test Local Control
module, which allows on-site testing and
troubleshooting of system functions. The TLC
module plugs into the receiver and operates off
the receiver's power. Use the TLC to check pan/
tilt functions (up, down, left, and right), iris
open/close, focus near/far, and zoom
telephoto/wide angle.
The outdoor model accepts either 120 or 230
VAC input. It supplies 24 VAC for camera
power, 24, 120, or 230 VAC for pan/tilt
operation, and 120 or 230 VAC for heater,
blower, or defroster accessories inside the
camera enclosure.
| 
