| Pelco KBD300A keyboard is a full-function, desktop keyboard controller that can be used in a variety of applications. A barrel-type joystick provides precise pan and tilt control of fixed speed and variable speed receivers. Twisting the joystick clockwise or counter clockwise zooms the lens in or out.
Keys select cameras and monitors; operate presets,patterns, auxiliaries, and sequences; open and close the iris; zoom and focus the lens; and start and stop auto, frame, and random scanning. The keyboard can be used in three modes of operation: CM6700 Mode, CM6800 Mode, and Direct Mode. The KBD300A keyboard automatically recognizes the mode.
In the first two modes, the keyboard is plugged into a CM6700, CM6800, or CM9760-SAT switcher/controller unit (SCU) and is used to program and operate the SCU. The maximum number of keyboards per unit is eight (CM6700 and CM6800-32X6), sixteen (CM6800- 48X8, CM6800E-48X8, and CM6800-96X16) or four (CM9760-SAT). In CM6700/CM6800 applications, the keyboard can control cameras connected directly to the SCU or through an MX4000 Series Genex multiplexer.
If you do not need all the features of the CM6700/CM6800 SCU, but want the same keyboard functionality, then one keyboard can be wired directly to camera receivers in Direct Mode (KBDKIT required). Up to 16 receivers can be wired to a keyboard; however, a switcher such as an MS500 or VA6100, is required to route video to the monitor. Direct Mode uses two-wire control of receivers using Pelco’s P or D protocol.
The KBD300A keyboard can also be used for on-screen programming of the CM9760-MDA master distribution amplifier. When used with the CM9760-DMR data manager, up to four KBD300A keyboards can be used to control a single Pelco P or D protocol device such as a Spectra dome or Esprit/ExSite positioning system.
Product Details: - Keyboard to Control:
– CM6700/CM6800/CM9760-SAT Matrix Switchers
– Genex® Multiplexer When Used with CM6700 and CM6800
– Up to 16 Receivers Directly from Keyboard (such as Spectra®,
Esprit®, and ExSite™) - Automatically Recognizes Modes of Operation
- Joystick Control of PTZ Functions
- Preset Position and Pattern Control
- Auxiliary Operation
- Auto/Random/Frame Scanning
- Programming of CM6700/CM6800/CM9760-SAT/CM9760-MDA
| 
