|
Samsung GVI GV-V2015 Matrix features comprehensive functions for any security/surveillance system, pre-confi guration to assure the highest level of reliability, and modular architecture for ease of installation and operation. Ideal for any small to medium scale Video security / CCTV surveillance system, the Samsung GV-V2015 represents the peak of video matrix switching technology while remaining a highly cost effective solution. Utilizing microprocessor technology the GV-V2015 natrix can provide automated electronic surveillance or it can allow even a single user to control an entire CCTV system for up to 80 video inputs by 16 video outputs.
In an automated environment the user can pre-define tours and salvos to be performed separately on individual monitors. For maximum security, an available video-looping module provides extension of the original video for output to a DVR or other recording device.
The Samsung matrix communicates with controllers or PCs via RS-232 data or TCP/IP protocols. An entire system of up to 64 nodes can be networked and controlled from one main station via Ethernet protocols. The GV-V2015 is also compatible with other matrix switchers, including, GV-V2011, GV-V2020
and GV-V2040. Available windows-based system setup software greatly simplifies the initial setup procedure as well as ongoing maintenance of system parameters.
Available GUI software further simplifies the matrix system operation by the utilization of an on-screen system keyboard which is a fully functional representation of the Samsung GV-V2116. Users can be defined at different levels of administration to further enhance the security of the system.
Samsung GV-V2015 Main Features:
- Up to 80 video inputs, 16 video outputs
- TCP/IP Networkable up to 64 nodes; compatible with other
- TCP/IP networkable switchers: GV-V2011, GV-V2020, GV-V2040
- RS-232 and Ethernet communication
- MPEG-4 or M-JPEG compression for Video over IP
- Modular microprocessor based, full cross-point video matrix
- Control of fixed or variable speed pan/tilt and dome cameras operating on Manchester, RS-422, or RS-485 PTZ protocols.
- 24 tours, 35 event timers and 8 salvos
- 5 alarm display modes and 5 alarm clearance modes
- 5 flexible RS-232 ports; expandable to 20
- 16 programmable alarm inputs (expandable to 240), 2 alarm outputs
- 4 sets of Manchester control code output
- Run and alarm status indicators
- 19-inch EIA rack mounting
SPECIFICATIONS
Video
- Video input: 75 Ohm, 0.5-2 V p-p composite
- Maximum inputs: 80
- Video output: 75 Ohm, 1 V p-p composite
- Maximum Video outputs: 16
- Frequency Response: ±1.0dB 5Hz~10MHz
- Gain: Rated value (±1dB)
- Differential gain: <1.0%
- Differential phase: <1.5°
- Differential delay: ±1.0°
- Field tilt: <0.5%
- S/N ratio: -55dB
Cross Talk
- Adjacent channels: -55dB(3.58MHz)
- Input to input: -70dB(3.58MHz)
- Return loss (input /output) : >40dB
- DC level: 0V
- Bandwidth: 15MHz
- Switching Speed: <16ms (typical)
- Non-Volatile Memory: for a minimum of 5 years
- On-screen display items: video input number, date/time,
- video input status titles (maximum characters 16) and monitor status
- Character set: English
Keyboard Connections
- Communication protocol: RS-232 and Ethernet
- # of RS-232 Ports: 5
- Connection type: 8-pin RJ-45 connector
Alarm/Relay Connection
- Alarm Inputs: 16
- Alarm Input Connector: One 20-pin “D” type
- Input port status: N.O. (Normally Open)
- Alarm Outputs: 2
- Alarm Output Connector: One 6-pin “D” type
- Contact Ratings: 1A @24VDC; 0.5A@110VAC
Power Supply
Input voltage: 120V/60Hz, 230V/50Hz
- Power requirements: Maximum 30W
Mechanical
- Dimensions: 146(H) X 483 (W) X 325 (D) mm; 5.25”(H) X 19.0”(W) X 12.8”(D)
- Mounting: Rack mount
- Unit weight: 6 Kg
- Color: Black
Environmental
- Temperature: 0ºC ~ 60ºC (32ºF - 140ºF)
- Humidity: 0 ~ 90%RH (non-condensing)
Compliance
- FCC: Part15, Class B
- CE: IEC60950, EN55024, EN55022
- UL / cUL: UL60950
- ISO 9001:2000
Network Ethernet Connection
- Data Interface: TCP/IP
- IEEE 802.3 Compliant
- Connection Type: RJ45
| 
