Sanyo VCC-P9574N Pan-focus IP PTZ Dome Security cameras Deep focus technology brings every area on-screen into crisp and clear focus for a precise picture with greater depth of field. In addition to the pan-focus lens developed by SANYO, Sanyo VCC-P9574N IP Dome Security cameras feature pan-tilt-zoom (PTZ) functions allowing remote control over a network for surveillance of wide areas.

Surveillance-Point Monitoring with Video and Audio Data

Sanyo VCC-P9574N IP Dome Security cameras are equipped to enable two-way voice communications via audio signals sent between cameras and PCs. Transmission of crystal clear images together with audio offers those overseeing surveillance as a sense of being right there at the scene. Sanyo VCC-P9574N IP Dome Security camera supports the IEEE 802.3af standard for Power-over-Ethernet (PoE) applications to allow power supplied over LAN cabling. In addition to making installation easier, this allows camera installation in places where it would otherwise be difficult to secure a power source.

Audio Transmission from Control Center PC to Surveillance Point

Sanyo VCC-P9574N IP Dome Security cameras allows Audio transmissions to be sent from the administrator’s side to the camera so as to provide advice or cautionary notices in the event of unaccounted for activity and other events during surveillance. Voice exchanges with personnel at surveillance points not only enable a more accurate grasp of the situation but also serve to prevent crimes or accidents.

PTZ Operations

Sanyo VCC-P9574N IP Dome Security cameras comes with a PT mechanism and allows panning of 335 degrees (110 degrees for wall mounted cameras) and tilting of 90 degrees (90 degrees*) to reduce blind spots in the surveillance area. When particular angles are preset on the camera (up to sixteen points), it moves to each position quickly at the speed of 120 deg/sec. max. for both panning and tilting. Combining these features with the motion detector, it is possible to catch all actions taking place in the area.

16 Preset Positioning and Sequential Monitoring Functions

Up to 16 preset positions (with different settings for pan, tilt and zoom) can be registered for a single Sanyo VCC-P9574N PTZ Dome Security camera. A simple key entry to a controller allows you to easily switch to the scene you want to monitor. Auto-pan monitoring can be also be programmed by designating two end points on a horizontal plane.

Intelligent Backlight Compensation

Sanyo VCC-P9574N IP Dome Security cameras feature two selectable backlight compensation modes: multi-spot metering (applied to the whole screen) and center-zone metering (applied to the central portion only).

Flexible Motion Detection

Sensing is performed by splitting the field of view into 16 areas. Movement and brightness levels within the picture are analyzed to accurately detect surveillance targets. Upon detection, the camera sends an alarm status signal and captures the object at zoom magnifications of up to x2.6. Fine adjustments of settings such as sensitivity, tracking time, zoom ratio and areas not requiring detection can also be made.

Privacy Masking (Up to 8 Masks)

When there is a house or even an object as small as a window within the camera frame, it is possible to mask the area so that it will not appear on the monitor screen to protect other’s privacy. Up to 8 rectangular masks of arbitrary size can be set. These masking areas may be protected with a 4-digit (max.) password.

520 TV Line Resolution (Analog Video Signal)

Featuring SANYO’s DSP circuitry and a high performance 1/4- inch CCD for horizontal resolution of more than 520 TV lines and superior color reproduction. Sharp, crisp images are delivered for greater precision in surveillance under a varied range of conditions.

Built-in Electronic Shutter

A high-speed electronic shutter that is internally switchable for eight modes using a DIP switch allows adjustment increments from 1/60 to 1/10,000 sec.

Operation on PoE, AC or DC Power Sources

Sanyo VCC-P9574N Pan-Focus IP Dome Security cameras can operate on PoE, 12VDC (12–15V DC) or 24 V AC (60 Hz, and even at a tolerance of ±10%). Switching to the correct mode occurs automatically when power is supplied.

Sanyo VCC-P9574N Pan-focus Network Dome Main Features:

• 1/4" color CCD camera
• Built-in x2.6 Motorized zoom pan-focus lens
• PTZ control via network
• Power-over-Ethernet (PoE) supported
• Networked surveillance with two-way voice communications
• PTZ control & remote camera setting by VAC-70