VideoTec HEP Series Weatherproof Housing is specifically designed for outdoor applications. The VideoTec HEP Security camera enclosure is suitable for 1/2, 1/3 and 1/4 CCD CCTV Cameras equipped with a wide range of lenses.
 Videotec HEP consist of an extruded aluminum body, die cast aluminum end cover plates and thermo-shaped rubber end-gaskets. The HEP Housing is equipped with sunshield and two PG9 cable glands with their relative EDPM-rubber gaskets. Also instead of standard cable glands the HEP security camera housings can be also equipped with connectors. This allows easy on-site replacement and installation on Pan Tilt heads. The Installation and Adjustment of cameras is made easier due to the ability to remove the body, leaving the internal slide in work position for easy and accurate configurations.
  A wide range of accessories id available including sun-shield, Heater Kit (Normal or re inforced for tempatures below -20°C), Blower kit, camera power supply and weatherproof junction box.

VideoTec HEP Main Features:

• Built in die-cast and extruded aluminum
• IP66 weatherproof rating
• Slide extractable body
• 2 cable glands
• Version with 30 poles connector (model 032)
• Version with 3+1 poles connector and BNC factory installed, complete with prewired cable for video input (model 038)
• Available accessories: sunshield, heater, camera power supply, blower and air filter, double power heater (for temperature down to -40°C -40°F)
  

Available Models:

HEP32D0A000
CCTV HOUSING 12.5-INCH

HEP32K2A000
CCTV HOUSING 12.5-INCH WITH SUNSHIELD AND HEATER 12-24VAC

HEP32K2A032
CCTV HOUSING 12.5-INCH WITH SUNSHIELD, HEATER 12-24VAC AND 30-POLES CONNECTOR

HEP32K2A038
CCTV HOUSING 12.5-INCH WITH SUNSHIELD, HEATER 12-24VAC. 3+1 AMPHENOL AND BNC CONNECTORS, BNC IS PREWIRED TO THE VIDEO CABLE

HEP32K2A074
CCTV HOUSING 12.5-INCH WITH SUNSHIELD AND DOUBLE HEATER 12-24VAC, 40W