Altelix NP141105GVA1C 14x11x5 Outdoor Vented Enclosure with 120 VAC Outlet, Green
- Maximum Purchase:
- 1000 units
Altelix NP141105GVA1C 14x11x5 Outdoor Vented Enclosure with 120 VAC Outlets
The Altelix NP141105GVA1C Green Vented Polycarbonate + ABS NEMA Weatherproof Enclosure with 120VAC Power and Aluminum Equipment Mounting Plate is ideal for protecting equipment from harsh environments and tampering. This enclosure is NEMA Type 3R, 3RX, IP24 Rated and it features two air vents with cleanable filters. The front and sides of this enclosure are RF transparent, making it ideal for wireless equipment.
The fully gasketed door features reinforced hinges, dual latches and a removable tamper-proof locking screw with key to secure the enclosure. There is also a provision for padlock use. Internal and external electrical ground points are also provided.
- Color: Green
- Dual 3" Vents with Rain Shields to Expel Heat
- Green ABS + Polycarbonate Enclosure
- Gasketed Lid with Tamper-Proof Locking Screw
- Dual Door Latches
- Includes Aluminum Mounting Plate with 120VAC Outlets
- Pre-wired 5 foot power cord
- NEMA Type 3R, 3RX, IP24 Rated
- Includes Wall Mount Hardware and Cable Grommets
- Proudly Made Here in the USA with Global Materials
PC+ABS Polycarbonate / ABS Blend for Extreme Durability
These enclosures are molded out of Green UV resistant PC+ABS, a high tech thermoplastic blend of polycarbonate and ABS which combines the best qualities of both into a single material. PC+ABS enclosures are superior to ABS enclosures because they maintain high toughness, durability and dimensional stability even at extreme cold and hot temperatures.
The green color of the NP141105GVA1C makes it ideal for deploying surveillance and security equipment as well as irrigation controllers, WiFi equipment and building automation control equipment which typically requires low visibility. It can easily blend in with indoor and outdoor gardens and landscapes.
This configuration consists of the Green PC+ABS NEMA enclosure with hinged lid and a 2.0mm thick aluminum plate with two 120VAC power outlets. A 5 foot pre-wired power cord is included to power the enclosure, so no additional wiring is required. A ground lug is provided on the side of the enclosure. Knock-outs on two sides of the enclosure are provided for additional wiring. Cable grommets are included with the accessory kit.
Aluminum Equipment Mounting Plate
The enclosure and plate can be drilled and modified by the installer to suit unique site requirements.
This enclosure features two 3 inch air vents. Rain shields help prevent rain water from entering the enclosure.
The enclosure can be wall mounted using the included wall anchors. An optional pole mount kit (NMK-0002) is also available for installation on poles up to 8 inches in diameter.
We offer numerous standard models and options including equipment mounting plates, DIN rails, AC or DC power, air vents, cooling fans and heaters and more. We also offer full customization, engineering and on-site CNC machining of enclosures and associated equipment, all with quick turnaround time. Please contact us with your unique requirements.
|Material||PC+ABS Polycarbonate / ABS Blend|
|Color||Green (RAL 6001)|
|Max Load||10A @ 120VAC|
|Outer Dimensions||13.4 x 10.4 x 4.7 Inches
(340 x 265 x 120 mm)
|Inner Dimensions||12.6 x 9.6 x 4.6 Inches
(321 x 244 x 116 mm)
|Mounting Plate Material||0.10 in (2.5 mm) Aluminum|
|Mounting Plate Dimensions||11.6 x 9.0 in. (295 x 229 mm)|
|Weight||4.6 lbs. (2.1 kg)|
|Power Cord Length||5 Feet (1.5m)|
|Ratings||NEMA Type 3R, 3RX / IP24|
|Flame Rating||Meets UL94-V0|
|Knockout Sizes (Diameter)||(4) 0.62 in. (16 mm)
(4) 0.78 in. (20 mm)
(4) 1.30 in. (33 mm)