Forgotten or lost login credential information needed to access surveillance systems and/or individual components is a fairly common occurrence for A1 customers. Specifically user names, passwords & IP addresses, which are all touched on in this article. The information found on this page will potentially be applicable for a wide-range of system applications and types (including, but not limited to) smaller residential systems on up to enterprise/commercial systems and even Integrators trying to help their customers!
We will warn you that some equipment manufacturers can have ‘advanced product lines’ that also include unique credential protocols. In those cases this information may not/would not apply, and if so, you can also try referencing the installation manual specific to that product. These manuals are often found online by searching your specific part number and then some light digging into those online search listings, but as well the A1 service team can provide manuals to you if you are unable to locate that.
is a chart that lists default credentials by manufacturer/brand name. If you or someone with access to your system
has changed any default values, then the default credentials would no longer
apply unless the equipment in question is first ‘reset’ (resetting equipment is
also something the A1 team is happy to help you if needed). Below is an easily referenced chart for you,
hope it helps but reach out to us if it does not or for any other service needs
you are unable to resolve yourself!
If you have any questions, please feel free to ask using the chat window below.
IP address: 192. 168.0.100
Arecont does not have a default password , but you can reset it to factory settings. Follow these steps
1-Access the camera's web interface by typing the IP in your web browser.
2-Under the Administration or System tab, click on Restore to Factory Default.
3-Once the camera reboots, all settings on the camera will be restored to factory default
For an old system:
IP Address: 192.168.0.90
But new generation AXIS cameras have a resetting sequence
1-Remove the Ethernet cable
2-Press and hold the control button and insert the Ethernet cable again while holding the control button.
3-Hold the control button until the amber lights turn on.
4-Then release the button .
5-Wait about 1 minute.
6-When the amber lights turns into the green lights your camera is resetted and your passoword as well
For old models:
IP Address: 192.168.0.1
For new models:
You can reset the camera by pushing the reset button about 7 seconds. Or you can reset the NVR by removing the battery on the mainboard (not recommended, at your own risk)
IP Address: 192.168.1.108
For old models (before firmware 5.3.0)
IP Address: 220.127.116.11
For new models you can reset password via SADP tool. Please click the link below and follow the instructions on the pdf file
Hikvision password resetting guide
Password: 1234 or model number of camera
IP address: 192.168.1.30
For old models:
Username: root or admin
Password: root or admin
For new models:
IP Address: 192.168.1.7
IP Address: 192.168.1.20
None . You can choose your own password after setup. If you want to reset it
1-Press and hold down the reset button for at least 1 minute
2-Power on the camera until the red light flashes rapidly
Now your camera is back to factory default without any password.
For other brands usernames and passwords please see below
|Camera Manufacturer||Username||Password||Default IP|
|ACTi||Admin or admin||123456||192.168.0.100|
|Arecont Vision||admin||no set password||no default/DHCP|
|Axis||root||pass or no set password||192.168.0.90|
|Bosch||Dinion||no set password||192.168.0.1|
|Canon||root||Model# of camera||192.168.100.1|
|Cisco||no default||no set password||192.168.0.100|
|IPX-DDK||root||Admin or admin||192.168.1.168|
|JVC||admin||Model# of camera||no default/DHCP|
|March Networks||admin||[leave blank]||unknown|
|Merit Lilin Camera||admin||pass||no default/DHCP|
|Merit Lilin Recorder||admin||1111||no default/DHCP|
|Messoa||admin||Model# of camera||192.168.1.30|
|Samsung||root||4321 or admin||192.168.1.200|
|Samsung||admin||4321 or 1111111||192.168.1.200|
|Starvedia||admin||no set password||no default/DHCP|
|Vivotek||root||no set password||no default/DHCP|
Average Rating based on 0 ratings
based on 0 recommendation
Would you recommend this item ?
Write A Review
No posts found