Security cameras can be one of the most effective tools for any household or business, but they can be wildly frustrating when the video footage from them is unclear or not to your standard. While each type of security camera has a specific level of video footage they produce, they each also are subject to similar issues that might hinder or completely disrupt their performance in this specific regard.

Common Problems with Security Camera Quality

Security cameras can be one of the most effective tools for any household or business, but they can be wildly frustrating when the video footage from them is unclear or not to your standard. While each type of security camera has a specific level of video footage they produce, they each also are subject to similar issues that might hinder or completely disrupt their performance in this specific regard.

In this article, A1 Security Cameras will go over many of the problems we have encountered through the many security cameras we have installed. After reading, you should have a better understanding of each problem that may inflict your surveillance, maybe even finding a distinct solution for your own issues at hand.

Problems with wired security camera quality?

When it comes to wired security cameras, you will rarely run into issues that distinctly inhibit the video quality of a given video feed. However, there are some problems that may occur that are connected to the initial setup. One such issue can be ground loop interference, which may affect either the video quality itself or cause the device to be unusable. Common signs of this problem include:

  • Error messages
  • Lack of energy to the camera
  • Static or noise in the feed

This issue typically occurs through improper cable management and system installation. When detected, it is best to sever the ground loop. This issue may also occur when your wiring is on a metal surface that is a part of a system that runs a charge or signal.

Does WiFi affect camera quality?

Wireless security cameras do not necessarily have the same issues when it comes to video quality, but the unique problems that afflict this type of camera are unique. Due to their capability in transferring video footage data, they are dependent on the local network strength in order to effectively function.

The most common problems thereby will come out of the network connection itself for wireless cameras and their quality. When a wireless camera has choppy or odd-looking video footage, they most likely are having connectivity issues. For streaming, this can also look choppy or will freeze mid-frame. The problem can thereby be fixed by strengthening your signal or using an access point, if not by moving your router.

Do security cameras record in color?

Unlike the security cameras of previous generations, modern surveillance is capable of providing a high-definition video stream in color. Such a quality is most common in internet protocol cameras, Which are the current generation of security cameras at the time of writing. However, for security cameras, viewing in color versus black and white may take up more storage space in a given recorder hard drive. The difference in size is not necessarily significant but might be with security camera systems with more than a small number of cameras. For cameras that actively improve video quality based on color, there is a significant difference in detail that can be reduced when storage capacity is an issue.

How far can CCTV zoom?

Depending on your security camera, you could have no zoom at all or enjoy a clear and crisp picture that precisely zooms in on something dozens of yards away. Pan Tilt Zoom cameras are well known in this regard, providing an effective view with a camera that can be directed at objects all around it. This type of zoom is known as optical or motorized zoom.

However, while some cameras have an effective zooming capability, another type that is less effective is known as digital zoom. Instead of physically using a magnifying lens or enhancing a view physically, digital zoom affects the video data and pixels. This may provide detail up to a certain point but is not effective and blurry a picture if used extensively.

Do CCTV cameras deteriorate?

Like other technological additions to a home or business, security cameras do deteriorate over time. Unfortunately, this will apply to the device itself and the cabling that connects it. However, while a security camera can last between five to ten years when kept in good condition, new security camera cables often outlast the home or business owner. Whereas this is especially the case indoors, outdoor installations are subject to a shorter working lifespan. To combat this, A1 Security Cameras suggests regularly looking over your equipment, especially after a storm or days of hot and direct sunlight. While it might seem simple, measures like this provide you the opportunity to spot problems early.

Why are my security cameras fuzzy?

Often enough, fuzzy video footage has to do with the connection between the security camera and the recorder itself. Some cameras have a specific connection they must use in adhere to in order to work properly, while others can easily be connected to the maximum length a cable can go. However, if your cabling is too long or you do not use extenders, the video quality can deteriorate on the way to the recorder. A1 Security Cameras recommends measuring the distance before installation and applying the appropriate measures if the expanse is too far. As a reminder, while coaxial cables have different maximum lengths, ethernet cables all feature a max distance of 300 feet before needing an extender.

How do you fix a foggy camera lens?

A foggy camera lens is an easy fix for security camera system owners if you can reach the device. However, if you have cleaned the device and it still appears blurry on the video feed, there may be an issue with it being out of focus or the video connector may be loose and needs adjusting.

Adjusting, or focusing, the security camera is simple thanks to the screws that are placed exactly for this purpose. If they are not clearly visible, check your security camera’s spec sheet and have an additional person watch the video feed. You should get a confirmation from them once you adjust the focus enough through the screws. Of course, this is if your camera does not have auto focus.

Fixing your security camera connector is equally as simple, if not more, with it being one of the points a wired security camera connects to the transmission cable. If it does not lock in place, it may require replacing or the addition of tape, if that works.

What causes CCTV cameras to flicker?

Whereas a fuzzy video feed generally has to do with a security camera having a bad connection with the transmission line, a flickering screen can mean a few different problems. The first is either the power going into the device is insufficient or that there is something wrong with the power line. The other issue however could be that the software settings for the specific camera or central recording device are not correctly set.

The solution to the power line is simple regardless of either mentioned issue. You should first check the transformer, cable, and connector of the power line before reinserting it and making sure the connection is tight. If the power is insufficient, check the camera spec sheet and make sure it is the right one. If it is the wrong one or the device is somehow damaged, a new one will need to be ordered.

The other issue is equally as simple and requires less movement. All you need to do is inspect your security camera through the configuration menu. Generally, the manufacturer will provide the correct settings for the camera when it reaches you. Some cameras and recorders may also need an update to work properly.

How can I make my security camera clear?

When you are looking to make your security camera video quality as crisp and clean as possible, there are a few methods that you can explore to make that happen. As mentioned, the first thing you can do here is maintain a clean lens cover and lens itself. Due to how security cameras are crafted, insects like bees and wasps like to use them for nesting areas. Every Spring, make sure to spray the appropriate deterents around your camera to prevent infestation.

Secondly, you can configure your camera to your preferred resolution through your recorder. Just select the camera and update it to your preferred settings. However, keep in mind that enhancing resolution will cost more space in a given hard drive. A1 Security Cameras encourages security camera system owners to use our NVR and DVR storage calculator for the best possible recorder for their video quality.

Why is my dome cover inhibiting the camera?

Dome cameras are designed with a protective dome casing around the camera to protect it against impact and general threats. However, when installed incorrectly, when there is a flaw in the manufacturing, or when the drying pack internally wears out, the protective dome fogs up through perspiration. Over time, this will cause the dome to accrue markings on the inside and inhibit the camera’s ability to provide a sufficient visual. Unfortunately, when this occurs regularly, the dome must be replaced and a drying packet must be inserted after the security camera is properly reinstalled. A1 Secuity Cameras has a policy against using dome cameras as outside cameras, opting instead to use the turret design.

Why does my security camera not work at night?

Not all security cameras feature infrared or night vision capabilities. However, for those that do and when it is not working, there can be two possible problems. The first is that there is simply too much light surrounding your security camera, which can easily be remedied by reducing the surrounding light levels.

However, the second may be that your infrared lights are not functioning properly or are out entirely. Firstly, check that the power source is sufficient for the camera, as much of the time it simply needs the proper charge to work. If that is not effective, contact the manufacturer and see about using a warranty with that entity or from the purchaser.

Why is my security camera grainy at night?

A grainy feed from a night vision security camera typically means that the infrared lights built into the device are not capable of functioning effectively in the light level around it. While it might seem overly straightforward, the best course of action would be to add additional light sources to the surrounding area. Furthermore, it would also benefit the camera to double check the connection in the case that extra lighting does not help, as stated above.

How do I improve night vision on my security cameras?

Unless you are using a box security camera, there is not as much you can do to add to the effectiveness of your camera’s night vision. When purchasing the camera, it is best to reference the infrared capability from the spec sheet and use it where appropriate. If it cannot handle the level of darkness in a given environment, implementing more lights may assist in expanding its capability.

How do you stop glare on a night vision camera?

Unfortunately, infrared or night vision cameras have a standard problem of a glare or reflection in the lens. Typically, this can easily be solved in one of two ways. The first is to make sure it is not directly facing a light source and that it can view an expanse without a direct view of a light source. The second tends to be too close of proximity to a reflective or light surace. In both cases, a simple adjustment of the viewing angle should do the trick in removing the glare from the security camera lens.

What interferes with wireless cameras?

Extended proximity from a WiFi source, multiple other wireless devices on a given network, and metal. While A1 Security Cameras provides a Bitrate Calculator free of charge for everyone, using the device on a crowded network or far from it will affect the quality of the feed. The option available for this problem will typically be to strengthen the wireless output of the router. When your home or business features a lot of metal on the premises, your signal can become weaker especially if you use outdoor cameras. One of the best methods for this is a WiFi extender or access point.

Can you scramble security cameras?

Yes, A1 Security Cameras has authored a post about this specific instance. Jammers are devices that scramble a wireless camera feed and effectively neutralize it. Typically, these devices are illigal and heavy penalties are dealt to those that choose to use them. However, the best method against these devices is to provide your security camera with a wired connection.

Why are most security cameras so low quality?

Whereas normal cameras, like those found on cellular devices, do not need to reduce their settings to save data. Security cameras often do to best make use of the central storage device. Most locations with a security camera system also feature an old design due to having had them for over an extended period. For those looking to get a better surveillance apparatus in their home or business, A1 Security Cameras can easily help with our design planning services. Allow our professionals to make you the system that meets your needs while helping to keep you and your family safe!

Feb 9th 2022 Wayne Hahne

Recent Posts