Nitek TS515 is a complete Twisted Pair Video system made up of a TR515 receiver unit and a VB37 balun unit. The system is designed to operate over Category 2, 3, 4, 5, 6 or 7 twisted pair cable. It works well over existing communication, computer network spare pairs, or new cable installations. A highly balanced transmitter output assures that the system will not interfere with other network equipment. Advanced receiver and transmitter electronics provide optimum video quality and complete immunity from ground loop, hum and noise. Both the transmitter and receiver provide adjustment for gain and frequency compensation allowing the system to be “finetuned” for the cable. These unique adjustments provide optimum performance over the entire operating range of the system and allow cable lengths to be estimated with a wide safety margin. The receiver and transmitter units each require 24 VAC power. In multiple receiver and/or transmitter applications a common supply can be used for the system.

Nitek TS515 Main Features:

• Active electronics compensate for frequency and level loss providing the highest quality video
• High resolution color or monochrome video
• Immunity to ground loop. Video and AC can be run in a common raceway, where code allows
• Built-in protection from power surges, transients, static or other electrical interference
• Video can be run in the same cable with telephone and computer signals
• Weather resistant design
• Easy to install