Bosch ENKIT-SDI2 SDI2 Inovonics Wireless Interface and Receiver Kit

Bosch ENKIT-SDI2 SDI2 Inovonics Interface and Receiver Kit

Kit containing B820 and EN4200 for use on SDI2 bus panels.

The B820 Inovonics Interface Module is a fully supervised, addressable SDI2 bus device that allows communication between Bosch control panels and an Inovonics EN4200 EchoStream Serial Receiver with EchoStream Wireless transmitters. Industrial, commercial, and institutional facilities are typical installations for the B820 module. Paired with an Inovonics EchoStream EN4200 Receiver, the B820 Inovonics Interface Module provides a wireless security solution when connected to the control panel's SDI2 bus. The B820 switch provides for simple, visual addressing.

Key features:

• Provides connectivity to Inovonics EchoStream EN4200 Serial Receiver
• May be installed up to 1000ft from the control panel, allowing for optimal wireless reception
• Capacity to store any combination of point and keyfob ID's for a total of 350 wireless devices (combined types) and up to 8 repeater ID's
• UL and CSFM Listed
• Supervision montoring The software monitors and communicates status information over the data bus for the following: ,
  • Operational power (Heartbeat)
  • Transmit data (TX)
  • Receive data (RX)

Compatibility information

Control panels:

• B5512 (Up to one module)
• B4512 (Up to one module)
• B3512 (Up to one module)
• All versions of the D9412GV4 (SDI2 bus)
• All versions of the D7412GV4 (SDI2 bus)
• All versions of the D7212GV4 (SDI2 bus)

Receivers:

Inovonics EchoStream EN4200 Serial Receiver

Repeater:

Inovonics EchoStream EN5040-T High-Power Repeater

Transmittter:

All Inovonics EchoStream transmitters