Pelco VXP-P2-24-JT Power 2 Video Server with 24TB HDD, JBOD, Windows 10 IoT, Dual Power Supply

Pelco VXP-P2-24-JT Power 2 Video Server with 24TB HDD, JBOD, Windows 10 IoT, Dual Power Supply

VideoXpert is a video management system (VMS) in a single box, designedforeasy setupandrobust monitoringinsmall or moderately sizedapplications. Designed for Windows platforms, VideoXpert is easy toinstall, quick tosetup, andprovides anintuitiveinterfacethat helps operators usevideocapturedby the system. VideoXpert is availableintailor-madehardwaresolutions orinsoftwaredistributions tosupport your existing VMS infrastructure.

VideoXpert provides options tosupport thethroughput youneed; anddifferent amounts of storageinRAID 6, RAID 5, orJBOD arrangements tofit yourneeds forretention, redundancy, andfault tolerance. Softwarelicenses operateinterms of channels, soyoudon't overpay forthesolution youneed. Thesystem supports unicast andmulticast transmissionmodes, easily adaptingtoyournetwork scheme.

Power2Series Server models also include Dell’s iDRAC (integratedDell RemoteAccess Controller) platform andsupport forDell’s OpenManagetools, allowingadministrators toremotely configureand support VideoXpert Professional servers, reducing the need for physical access to the server. Using the iDRAC controller, youcanmonitorhardware and receive email alerts via SNMP.

Key Features:

• Rack (2RU)
• Intel Xeon Silver 4210
• 16GB DDR4
• Microsoft Windows 10 IoT Enterprise 64-bit (LTSC) or Server 2019
• OS Drive: 2x SSD 480GB (RAID 1)
• Max Storage: 96TB (7200RPM SATA)
• RAID: 6/5/JBOD
• iDRAC9 Basic
• 4x Mini DisplayPort 1.4
• NVIDIA Quadro P620 (2GB memory)
• 2x + dedicated iDRAC port
• Up to 450 Mbps Recording Throughput
• 100 to 240 VAC 50/60Hz, autoranging
• Dual Hot Swappable 750W (Platinum)
• 2891 BTU/hr max consumption

Notes:

1. You must havea separate Workstation with the Power2 series Server
2. The Power 2 Server ships with a cable management mount bracket at the end of each rack rail, as shown in the red box in the image below. This extends theserverdepth to 1000mm, as opposed to 800mm. To mount the Power 2 Server in a standard 800mm depth rack, removethecablemanagement mount brackets from the rack rails; otherwise, donot remove the cable management mount brackets, and use a rack with 1000 mm depth.