ADI Pro 0E-10P8RJ45E 10-Port Gigabit Extended Range PoE+ Switch

ADI Pro 0E-10P8RJ45E 10-Port Gigabit Extended Range PoE+ Switch

The ADI Pro 0E-10P8RJ45E is a 10-port Gigabit Extended Range PoE+ switch engineered for IP security camera systems, access control networks, and small-to-mid-size enterprise data communications. The compact desktop chassis pairs 8 PoE+ ports (30 W per port, 120 W total budget) with a dedicated 1 Gb copper uplink and a 1 Gb SFP fiber uplink — providing flexibility for both short-run copper backhaul and long-range fiber trunking from a single access-layer switch.

An integrated AI DIP switch on the front face gives installers four one-toggle operating modes without requiring a management console: PoE Watchdog automatically resets ports on hung IP cameras and recovers frozen edge devices; QoS prioritizes video and voice traffic to prevent frame drops; Extend mode doubles the standard 100 m Cat5e reach to up to 250 m of PoE+ and data over the same copper cable; and VLAN mode isolates camera-to-camera broadcast traffic to eliminate broadcast storms and reduce lateral attack surface — all without a browser or SNMP configuration.

The switch delivers 20 Gbps switching capacity with a 4K MAC address table, IEEE 802.3, 802.3u, 802.3ab, 802.3af, and 802.3at compliance, and a 100-240 VAC universal input for global deployment. The Extend mode's 250 m reach is a key differentiator for perimeter camera deployments, parking lots, and outbuildings where the standard 100 m PoE reach falls short — often eliminating the need for a separate fiber run and media converter pair.

Key Features:

• 10 ports total: 8x RJ45 PoE+ (30 W/port) + 1x RJ45 Gigabit uplink + 1x Gigabit SFP fiber uplink; single access-layer switch for mixed copper and fiber deployments
• 120 W total PoE+ power budget; supports 4 fully-loaded IP cameras or PoE+ devices simultaneously without derating
• Extend mode; doubles standard Cat5e reach from 100 m to up to 250 m for perimeter, parking-lot, and outbuilding IP camera runs
• PoE Watchdog; automatically resets ports on hung IP cameras and self-heals frozen edge devices
• VLAN mode; isolates camera-to-camera broadcast traffic to prevent broadcast storms and reduce lateral attack surface
• QoS mode; prioritizes video and voice traffic to prevent frame drops on busy networks
• AI DIP switch configuration; enables PoE Watchdog, QoS, Extend, and VLAN modes with a single toggle — no browser or SNMP needed
• 20 Gbps switching capacity; non-blocking wire-speed forwarding on all 10 ports
• 4K MAC address table; supports typical mid-size access-layer deployments
• IEEE 802.3, 802.3u, 802.3ab, 802.3af, and 802.3at compliant; broad interoperability with standard PoE cameras, phones, and access points
• 100-240 VAC universal input; single SKU deploys anywhere in the world
• Compact 7 x 4.2 x 1.1 in desktop chassis; fits on a shelf, wall, or alongside the host NVR
• Plug and Play out of the box; ready for basic operation without configuration
• Ideal for small-to-mid-size IP camera installations, access control networks, and structured cabling upgrades