Altronix AL1002ADA220 NAC Power Supply - 2 Class A or 4 Class B Outputs

Brand: Altronix
Part Number: AL1002ADA220
Write a Review
$378.54
Free shipping over $300 Free Shipping
Technical Support Technical Support
Lifetime Warranty Lifetime Warranty

Description

Altronix AL1002ADA220 NAC Power Supply - 2 Class A or 4 Class B Outputs

AL1002ADA220 are extremely cost effective voltage regulated remote NAC Power Extenders. They may be connected to any 12 or 24 volt Fire Alarm Control Panel (FACP). Primary applications include Notification Appliance Circuit (NAC) expansion (supports ADA requirements) and providing auxiliary power to support system accessories.

Key Features:

  • Input
    • Nominal 220VAC (operating range 198VAC - 256VAC), 50/60 Hz, 2.5A.
    • Two (2) Class A, Style Z or two (2) Class B, Style W, Y FACP inputs.
    • Two (2) NC dry contact trigger inputs.
  • Output
    • 24VDC @ 10A max total alarm current.
    • 2.5A max current per output.
    • Separate 1.0A auxiliary output.
      • Programmable supervised indicating circuit outputs:
        • Four (4) Class B, Style W, Y or Two (2) Class A, Style Z or One (1) Class A, Style Z and Two (2) Class B, Style W, Y.
    • Thermal and short circuit protection with auto reset.
  • Battery Backup
    • Built-in charger for sealed lead acid or gel type batteries.
    • Automatic switchover to stand-by battery when AC Fails.
    • Zero voltage drop when switching over to battery backup.
  • Supervision
    • AC fail supervision (form "C" contact, 1A/28VDC).
    • Factory set for 30 seconds with optional 2.5 to 3 hour delay setting (field selectable).
    • Instant local AC trouble reporting relay (form "C" contact, 1A/28VDC).
    • Battery presence and low battery supervision (form "C" contact, 1A/28VDC).
  • Visual Indicators
    • Input and output status LED indicators.
  • Special Features
    • 2-wire horn/strobe Sync mode allows audible notification appliances (horns) to be silenced while visual notification appliances (strobes) continue to operate.
    • Sync protocols include Potter/Amseco, Faraday, Gentex®, System Sensor®, and CooperWheelock®.
    • Temporal Code 3, Steady Mode, Input to Output Follower Mode (maintains synchronization of notification appliances circuit).
    • Compatible with 12VDC or 24VDC fire panels.
    • Output loop supervision steered to input 1 or input 2.
    • Signal circuit trouble memory (helps identify intermittent loop problems).
    • Common trouble input and output.
    • Ground fault detection.
    • Unit includes power supply, red enclosure, cam lock, and battery leads.
  • Temperature
    • Operating 0° C to 49° C (32° F to 120° F).
    • Storage - 20° C to 70° C ( - 4° F to 158° F).
    • Relative Humidity 85% +/- 5%.
    • BTU/Hr. (approx.): 31 BTU/Hr.

Downloads

Additional Information

Accessory Type:
Power Supply
Warranty:
Life-time Warranty
View AllClose

Customers Also Viewed

Discontinued
LTS LTH-M201-C-2 2 Wire Intercom Camera Module with IR

LTS LTH-M201-C-2 2 Wire Intercom Camera Module with IR

Brand: LTS Security

Part Number: LTH-M201-C-2
$369.35
  • Compression : H.264,
  • Field of View (Horizontal) : 180°Field of View
  • Color : Black
  • Audio Support : Built-in Microphone
Free shipping over $300 Free Shipping
15ft 15ft Night Vision
Black Black
Discontinued
LTS LTH-M201-C Video Intercom Camera Module

LTS LTH-M201-C Video Intercom Camera Module

Brand: LTS Security

Part Number: LTH-M201-C
$369.35
  • Compression : H.264,
  • Field of View (Horizontal) : 180°Field of View
  • Protection Code : IP65
  • Audio Support : Built-in Microphone Built-in Speaker
Free shipping over $300 Free Shipping
Network (IP) Network (IP)
15ft 15ft Night Vision