Altronix
Altronix AL600ULACM 8 Fused Outputs Power Supply/Access Power Controller - 12/24VDC @ 6A
- SKU:
- AL600ULACM
Description
Altronix AL600ULACM Access Power Controller
Altronix AL600ULACM Access Power Controller routes power to a variety of access control hardware devices, including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. This device converts an input of 115VAC 60Hz into eight (8) independently controlled outputs, generating a total of 6 amp continuous supply current. In addition, the FACP interface enables emergency egress, alarm monitoring, and can trigger other auxiliary devices.
Key features of Altronix AL600ULACM
- Input 115VAC 60Hz rated @ 3.5 amp input
- Power supply input options:
- 1 common power input for ACM8/ACM8CB and lock power
- Eight (8) Access Control System trigger inputs
- 8 normally open (NO) inputs
- 8 open collector inputs
- 12VDC or 24VDC @ 6 amp supply current
- Independently controlled outputs
- 8 Fail-Safe and/or Fail-Secure power outputs
- 8 form "C" 5 amp rated relay outputs
- Short circuit and thermal overload protection
- AC fail supervision (form "C" contact)
- Red LEDs indicate outputs are triggered (relays energized)
- Green LED indicates FACP disconnect is triggered.
- Built-in charger for sealed lead acid or gel type batteries
- AL600ULB (Power Supply Board) maximum charge current 0.7 amp
- Zero voltage drop when unit switches over to battery backup (AC failure condition).
- 0° C to 49° C ambient Operating temperature
- ACM8 board main fuse is rated at 10 amp
- 12VDC: 36.85BTU/Hr
- 24VDC: 73.70BTU/Hr
- Lifetime Warranty
- Wall mount enclosure for indoor use
- Accommodates up to two (2) 12VDC/12AH batteries
- Dimensions 15.5"H x 12.25"W x 4.5"D
- 1.125" and 1.375" combination knockouts
- Approx. 10.3 Lbs. (4.67 kg)