Altronix AL600ULACMCB Multi-Output Power Supply

Altronix AL600ULACMCB Multi-Output Power Supply
Altronix AL600ULACMCB Access Power Controller routes power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. The 8 independently controlled outputs operate in both Fail-Safe and/or Fail-Secure modes. The device includes a fire alarm disconnect feature that is individually selectable for any or all of the 8 outputs.

Key Features of& Altronix AL600ULACMCB Multi-Output Power Supply

• Input 115VAC 60Hz rated @ 3.5 amp
• Power supply input options:
  
  • 1 common power input for ACM8CB and lock power (factory installed)
  • 2 isolated power inputs - One to power the ACM8CB and one for lock accessory
• Eight (8) Access Control System trigger inputs
• Eight 8 normally open (NO) inputs
• Eight (8) open collector inputs
• 12VDC or 24VDC @ 6 amp supply current
• Class 2 Rated power limited outputs
• 8 Fail-Safe and/or Fail-Secure power outputs
• 8 form "C" 5 amp rated relay outputs
• 8 auxiliary power outputs (unswitched)
• PTCs are rated @ 2.5 amp
• Filtered and electronically regulated outputs (built-in power supply)
• Short circuit and thermal overload protection
• AC fail supervision (form "C" contact)
• Red LEDs indicate outputs are triggered (relays energized).
• Green LED indicates FACP disconnect is triggered
• AC input and DC output LED indicators
• Built-in charger for sealed lead acid or gel type batteries
• AL600ULXB (Power Supply Board) maximum charge current 0.7 amp
• Battery fail and battery presence supervision (form "C" contact)
• 0° C to 49°: C ambient Operating temperature
• ACM8CB board main fuse is rated at 10 amp
• 12VDC: 36.85BTU/Hr
• 24VDC: 73.70BTU/Hr
• Lifetime Warranty
• Wall mount enclosure for indoor use
• Accommodates up to two (2) 12VDC/12AH batteries
• 15.5"H x 12.25"W x 4.5"D
• 1.125" and 1.375" combination knockouts
• Approx.10.3 Lbs. (4.672 kg)