Description
Altronix AL600ULXD Power Supply Charger - Single Class 2 Output
Altronix AL600ULXD power supply/charger converts a 115VAC 60Hz or 230VAC 50/60Hz input into a single 12VDC or 24VDC non power-limited output.
Key Features:
Input
- Input 115VAC / 60Hz, 3.5A or 230VAC 50/60Hz, 1.8A.
Output
- 12VDC or 24VDC selectable output.
- 6A continuous supply current.
- Filtered and electronically regulated output.
- Short circuit and thermal overload protection.
Battery Backup
- Built-in charger for sealed lead acid or gel type batteries.
- Automatic switch over to stand-by battery when AC fails.
Supervision
- AC fail supervision (form "C" contacts).
- Notification trigger is selectable for 30 seconds (factory set) or 6 hours.
- Low battery supervision (form "C" contacts).
- Battery presence supervision (form "C" contacts).
Visual Indicators
- AC input and DC output LED indicators.
Temperature
- Operating 0 to 49° C (32 to 120° F )
- Storage -20 to 70° C ( -4 to 158° F)
- Relative Humidity 85% +/- 5%
BTU/Hr. (approx.):
- 12VDC: 37 BTU/Hr.
- 24VAC: 74 BTU/Hr.
- System AC input VA requirement:
- 115VAC: 402.5VA.
- 230VAC: 414VA.
Downloads
Datasheet
Altronix AL600ULXD Datasheet