Altronix EBRIDGE100ST EoC and PoE/PoE+ Hardened Mini-Transceiver

Brand:
Part Number: EBRIDGE100ST
Write a Review
  • Altronix EBRIDGE100ST EoC and PoE/PoE+ Hardened Mini-Transceiver
  • Altronix EBRIDGE100ST EoC and PoE/PoE+ Hardened Mini-Transceiver
$173.00
$132.46
OR
Technical Support Technical Support
Lifetime Warranty Lifetime Warranty

Description

Altronix EBRIDGE100ST EoC and PoE/PoE+ Hardened Mini-Transceiver

Altronix eBridge100ST EoC hardened transceiver transmits data at 100Mbps, Full Duplex over Coax cable to a paired eBridge receiver and provides power in a PoE/PoE+ compliant format to an enabled device/camera. The eBridge receiver is available in various options and is powered by an external midspan or endspan. The receiver passes PoE/PoE+ power over the same coax cable to the eBridge100ST transceiver, which, in turn, passes this power to an enabled IP camera/device. These plug and play units facilitate a cost-effective, simple way to replace legacy analog products with new IP devices over existing coax up to 300m.

Key Features:

  • Auto detection and protection of legacy non-PoE cameras/devices.
  • Operating Temperature:
    • For 15W: -40° C to 75° C (-40° F to 167° F).
    • For 30W: -40° C to 60° C (-40° F to 140° F).
  • Storage Temperature: -40° C to 75° C (-40° F to 167° F).
  • Humidity: 20 to 85%, non-condensing.
  • Green - PoE ON (by respective RJ45 jack).
  • Yellow and Green LED (RJ45) IP Link status, 10/100Base-T/active.
  • Blue: Coax Link is active.
View AllClose

Additional Information

Accessory Type:
Other
Warranty:
Life-time Warranty
View AllClose

Customers Also Viewed