Altronix eBridge100STR EoC 100Mbps PoE/PoE+ Receiver & Small Transceiver Single Port Adapter Kit

Altronix eBridge100STR EoC 100Mbps PoE/PoE+ Receiver & Small Transceiver Single Port Adapter Kit

eBridge100STR is a versatile solution Ethernet adapter/media converter kit which transmits data at 100Mbps full duplex and power over Coax cable in a PoE+ compliant format. The eBridge100RM is powered via a PoE midspan, such as the Altronix Netway series, or by an endspan. The receiver passes the PoE(+) compliant power over cable to the eBridge100ST transceiver which in turn passes this power to an enabled IP Camera/device. These plug and play units facilitate cost effective solutions for IP devices that need to be installed at distances greater than 100m. They provide a simple way to replace legacy analog products with new IP devices over existing coax

Key Features of Altronix eBridge100STR

• Powered by midspan or endspan.
• PoE compliant to IEEE 802.3af (15W) and PoE+ compliant to IEEE 802.3at (30W)
• Connectivity: RJ45, auto-crossover.
• Wire type: 4-pair CAT5.
• Distance: up to 100m.
• Speed: 10/100BaseT, half/full duplex, auto negotiation.
• PoE compliant to IEEE 802.3af (15W) and
• PoE+ compliant to IEEE 802.3at (30W)
• Delivered to camera by eBridge100ST.
• Power provided by eBridge100RM to eBridge100ST by PoE protocol.
• Coax Distance: Coax 300m (Maximum Length of Coax Type vs. Camera Power/PoE Class, pg. 3) for power delivery.
• Coax Throughput is rated to pass 100mbps of data at distances up to 500m.
• Coax Connectivity: BNC, RG-59/U or similar.
• Operating Temperature - 40° C to 75° C (-40° F to 167° F).