Altronix eBridge1STR EoC Single Port Adapter Kit - 25Mbps

Altronix eBridge1STR EoC Single Port Adapter Kit - 25Mbps

Altronix eBridge1STR ethernet over coax adapter kit transmits data at 25Mbps and power over Coax cable in a PoE+ compliant format. The eBridge1PCRM is powered by an external midspan or endspan. The eBridge1PCRM receiver passes PoE/PoE+ power over the same coax cable to the eBridge1ST transceiver, which, in turn, passes this power to an enabled IP camera/device. These plug and play units facilitate a cost-effective, simple way to replace legacy analog products with new IP devices over existing coax up to 500m.

Key Features:

• Input (eBridge1PCRM)

  • Powered by midspan or endspan.
  • PoE compliant to IEEE 802.3af (15W) and PoE+ compliant to IEEE 802.3at (30W).

• Ethernet

  • Connectivity: RJ45, auto-crossover.
  • Wire type: 4-pair CAT5.
  • Distance: up to 500m.
  • Speed: 10/100BaseT, half/full duplex, auto negotiation. PoE compliant to IEEE 802.3af (15W) and PoE+ compliant to IEEE 802.3at (30W) delivered to camera by eBridge1ST. Power provided by eBridge1PCRM to eBridge1ST by PoE protocol.

• Coax Link

  • Distance: Coax 500m for power delivery.
  • Throughput is rated to pass 25Mbps of data at distances up to 500m.
  • Connectivity: BNC, RG-59/U or similar.

• LED Indicators

  • eBridge1PCRM and eBridge1ST:

    • Blue LED - Coax link connection.
    • Green LED - PoE ON.
    • Yellow and Green LED (by RJ45 jack): IP Link status, 10/100Base T/active.

• • eBridge1PCRM

    • Green LED: Power ON.

• Functions

  • Auto detection and protection of legacy non-PoE cameras/devices.

• Environmental

  • Operating Temperature:

• eBridge1PCRM:

  • - 20° C to 49° C ( - 4° F to 120.2° F).

• eBridge1ST:

  • For 15W: - 40° C to 75° C ( - 40° F to 167° F).
  • For 15W: - 40° C to 75° C ( - 40° F to 167° F).

• Storage Temperature:

  • - 40° C to 75° C ( - 40° F to 167° F).
  • Humidity: 20 to 85%, non-condensing.

• Operating Altitude

  • - 304.8 to 2,000m ( - 1000 to 6,561.679ft.).