Description
Altronix EFLOW104NB Power Supply/Charger
Altronix eFlow104NB UL Listed Sub-Assembly power supply/charger converts a 120VAC, 60Hz input into a single 24VDC output. It also offers a suite of features that includes fire alarm disconnect, overvoltage protection, and low power disconnect which prevents deep discharge of stand-by batteries.
Key Features:
-
Input Rating
- Input 120VAC 60Hz, 4.5A.
-
Output
- 24VDC output.
- 10A. continuous supply current.
- Aux. power-limited output rated @ 1A. (unswitched).
- Over Voltage Protection.
- Filtered and electronically regulated outputs.
-
Battery Backup
- Built-in charger for sealed lead acid or gel type batteries.
- Automatic switch over to stand-by battery when AC fails. Transfer to stand-by battery power is instantaneous with no interruption.
-
Fire Alarm Disconnect
- Supervised Fire Alarm disconnect (latching or nonlatching) 10K EOL resistor. Operates on a normally open (NO) or normally closed (NC) trigger.
-
Supervision
- AC fail supervision (form "C" contacts).
- Notification trigger is selectable for 30 seconds (factory set) or 2 hours.
- Battery fail & presence supervision (form "C" contacts).
- Low power shutdown. Shuts down DC output terminals if battery voltage drops below 80% of nominal. Prevents deep battery discharge.
-
Electrical
-
Temperature:
- Operating: 0° C to 49° C (32° F to 120° F).
- Storage: - 20° C to 70° C ( - 4° F to 158° F).
- Relative Humidity 85% +/- 5%.
- BTU/Hr (approx.): 123 BTU/Hr.
- System AC input VA requirement: 540VA.
-
-
Visual Indicators
- Green AC Power LED indicates 120VAC present.
- AC input and DC output LED indicators.
-
Additional Features
- Short circuit and overload protection.
Downloads
Datasheet
altronix-DS_eFlow104NB-A1.pdf
Popular Search
Additional Information
Accessory Type:
|
Power Supply
|
Input Current:
|
4.5A
|
Input Voltage:
|
120VAC
|
Output Current:
|
10A
|
Output Type:
|
DC
|
Output Voltage:
|
24VDC
|
Warranty:
|
Life-time Warranty
|