Altronix eFlow4NX Single Output Power Supply Charger

Brand: Altronix
Part Number: eFlow4NX
Write a Review
  • Altronix eFlow4NX Single Output Power Supply Charger
  • Altronix eFlow4NX Single Output Power Supply Charger
  • Altronix eFlow4NX Single Output Power Supply Charger
Technical Support Technical Support
Lifetime Warranty Lifetime Warranty
  • Color : Gray
  • Environmental : Indoor
  • Number of Supported Cameras : 2
  • Output Voltage : 12VDC 24VDC
  • Input Current : 3.5A
  • Input Voltage : 120VAC
  • Output Current : 4A


Altronix eFlow4NX Single Output Power Supply Charger

Altronix eFlow4NX is a power supply/charger that converts a 120VAC/60Hz input into a single 12VDC or 24VDC Class 2 power-limited output.

Power Supply Charger, Single Output, 12/24VDC @ 4A, Aux Output, FAI, LinQ2 Ready, 115VAC, BC400 Enclosure.

Key features:

  • Input
    • 120VAC, 60Hz, 3.5A.
    • Input fuse: 5A/250V.
  • Output
    • 12VDC or 24VDC selectable output.
    • 12VDC or 24VDC @ 4.0A supply current.
    • Class 2 power-limited output.
    • Auxiliary Class 2 Power-Limited output rated @ 1A (unswitched).
    • Ripple voltage: 960mV.
    • Overvoltage Protection.
  • Battery Backup
    • Built-in charger for sealed lead acid or gel type batteries.
    • Automatic switch over to stand-by battery when AC fails. Transfer to stand-by battery power is instantaneous with no interruption.
  • Supervision
    • AC fail supervision (form "C" contacts).
    • Notification trigger is selectable for 30 seconds (factory set) or 2 hours.
    • Battery fail & presence supervision (form "C" contacts).
    • Low power shutdown. Shuts down DC output terminals if battery voltage drops below 71-73% for 12V units and 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge.
  • Fire Alarm Disconnect
    • Supervised Fire Alarm disconnect (latching or non-latching) 10K EOL resistor. Operates on a normally open (NO) or normally closed (NC) trigger.
  • Electrical
      • Temperature:
        • Operating 0° C to 49° C (32° F to 120° F).
        • Storage - 20° C to 70° C ( - 4° F to 158° F).
    • Relative Humidity 85% +/- 5%.
      • BTU/Hr (approx.):
        • 12VDC: 12 BTU/Hr.
        • 24VDC: 49 BTU/Hr.
    • System AC input VA requirement: 420VA.
  • Visual Indicators
    • Green AC Power LED indicates 120VAC present.
    • AC input, DC output and Battery LED indicators.
  • Additional Features
    • Short circuit and overload protection.
    • Unit is complete with power supply, enclosure, battery leads and cam lock.

Additional Information

Accessory Type:
Power Supply
Input Current:
Input Voltage:
Number of Supported Cameras:
Output Current:
Output Voltage:
Life-time Warranty
View AllClose