Altronix EFLOW6NB Off-Line Switching Power Supply/Charger

(No reviews yet) Write a Review
SKU:
EFLOW6NB
UPC:
782239949830
  • Altronix EFLOW6NB Off-Line Switching Power Supply/Charger
  • Altronix EFLOW6NB Off-Line Switching Power Supply/Charger
$230.00
$175.83
Fast Shipping
Technical Support
  • Output Voltage : DC 12V DC 24V
  • Input Current : 3.5A
  • Input Voltage : AC 120V
  • Output Current : 6A

Description

Altronix EFLOW6NB Off-Line Switching Power Supply/Charger

Altronix eFlow6NB UL Listed Sub-Assembly power supply/charger converts 120VAC, 60Hz input into a single 12VDC or 24VDC output. It also offers a suite of features that includes fire alarm disconnect, overvoltage protection, and low power disconnect which prevents deep discharge of stand-by batteries.

Key Features:

  • Input Rating
    • Input 120VAC 60Hz, 3.5A.
  • Output
    • 12VDC or 24VDC selectable output.
    • 6A continuous supply current.
    • Aux. power-limited output rated @ 1A (unswitched).
    • Over Voltage Protection.
    • Filtered and electronically regulated outputs.
  • Battery Backup
    • Built-in charger for sealed lead acid or gel type batteries.
    • Automatic switch over to stand-by battery when AC fails. Transfer to stand-by battery power is instantaneous with no interruption.
  • Fire Alarm Disconnect
    • Supervised Fire Alarm disconnect (latching or nonlatching) 10K EOL resistor. Operates on a normally open (NO) or normally closed (NC) trigger.
  • Supervision
    • AC fail supervision (form "C" contacts).
    • Notification trigger is selectable for 30 seconds (factory set) or 2 hours.
    • Battery fail & presence supervision (form "C" contacts).
    • Low power shutdown. Shuts down DC output terminals if battery voltage drops below 80% of nominal. Prevents deep battery discharge.
  • Electrical
    • Temperature:
      • Operating: 0° C to 49° C (32° F to 120° F).
      • Storage: - 20° C to 70° C ( - 4° F to 158° F).
      • Relative Humidity 85% +/- 5%.
    • BTU/Hr (approx.):
      • 12VDC: 37 BTU/Hr.
      • 24VDC: 74 BTU/Hr.
    • System AC input VA requirement: 420VA.
  • Visual Indicators
    • AC input, DC output and Battery LED indicators.
  • Additional Features
    • Short circuit and overload protection.
View AllClose

Additional Information

Accessory Type:
Power Supply
Input Current:
3.5A
Input Voltage:
AC 120V
Output Current:
6A
Output Voltage:
DC 12V DC 24V
Warranty:
Life-time Warranty
View AllClose

Customers Also Viewed