Altronix EFLOW6NX16D 16 PTC Class 2 Outputs Power Supply Charger

(No reviews yet) Write a Review
SKU:
EFLOW6NX16D
UPC:
782239952212
  • Altronix EFLOW6NX16D 16 PTC Class 2 Outputs Power Supply Charger
  • Altronix EFLOW6NX16D 16 PTC Class 2 Outputs Power Supply Charger
$268.95
Technical Support
Lifetime Warranty
  • Color : Gray
  • Environmental : Indoor
  • Number of Supported Cameras : 16
  • Output Voltage : DC 24V DC 12V
  • Input Current : 3.5A
  • Input Voltage : AC 120V
  • Output Current : 6A

Description

Altronix EFLOW6NX16D 16 PTC Class 2 Outputs Power Supply Charger

Altronix eFlow6N series power supply/chargers convert a 120VAC 60Hz input into a single, eight (8) or sixteen (16) fused outputs or PTC protected Class 2 powerlimited outputs. Outputs are selectable for 12VDC or 24VDC with a total of 6A max. supply current. It also offers a suite of features that includes fire alarm disconnect, overvoltage protection, and low power disconnect which prevents deep discharge of stand-by batteries.

Key Features Of Altronix EFLOW6NX16D

  • Input
    • 120VAC, 60Hz, 3.5A.
    • Input fuse: 5A/250V.
  • Output
    • Sixteen (16) Class 2 power-limited PTC protected outputs (auto-resettable).
    • 12VDC or 24VDC @ 6.0A supply current.
    • Outputs are rated at 2A.
    • Auxiliary Class 2 Power-Limited output rated @ 1A (unswitched).
    • Overvoltage Protection.
  • Battery Backup
    • Built-in charger for sealed lead acid or gel type batteries.
    • Automatic switch over to stand-by battery when AC fails. Transfer to stand-by battery power is instantaneous with no interruption.
  • Supervision
    • AC fail supervision (form "C" contacts).
    • Notification trigger is selectable for 30 seconds (factory set) or 2 hours.
    • Battery fail & presence supervision (form "C" contacts).
    • Low power shutdown. Shuts down DC output terminals if battery voltage drops below 71-73% for 12V units and 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge.
  • Fire Alarm Disconnect
    • Supervised Fire Alarm disconnect (latching or non-latching) 10K EOL resistor. Operates on a normally open (NO) or normally closed (NC) trigger.
  • Electrical
      • Temperature:
        • Operating: 0° C to 49° C (32° F to 120° F).
        • Storage: - 20° C to 70° C ( - 4° F to 158° F).
    • Relative Humidity 85% +/- 5%.
      • BTU/Hr (approx.):
        • 12VDC: 37 BTU/Hr.
        • 24VDC: 74 BTU/Hr.
    • System AC input VA requirement: 420VA.
  • Visual Indicators
    • Green AC Power LED indicates 120VAC present.
    • AC input, DC output and Battery LED indicators.
  • Additional Features
    • Short circuit and overload protection.
    • Unit is complete with power supply, enclosure, battery leads and cam lock.
View AllClose

Additional Information

Accessory Type:
Power Supply
Color:
Gray
Environmental:
Indoor
Input Current:
3.5A
Input Voltage:
AC 120V
Number of Supported Cameras:
16
Output Current:
6A
Output Voltage:
DC 24V DC 12V
Warranty:
Life-time Warranty
View AllClose

Customers Also Viewed