Altronix NETWAY16MV 16 Port PoE/PoE+ Midspan Injector

Altronix NETWAY16MV 16 Port PoE/PoE+ Midspan Injector

Altronix NetWay16MV Managed Midspans provide power and pass data for PoE compliant cameras/edge devices. Cameras/edge devices may be located up to 100m from the NetWay unit. A NetWayXT repeater module can be utilized to extend the distance an additional 100m for a total range of up to 200m. A maximum range of 600m is possible using multiple repeaters, based on camera/device port requirement. NetWay Managed Midspans are capable of supporting non-PoE compliant fixed and PTZ IP cameras utilizing NetWay1512 or NetWay3012 adapters.

Key features of Altronix NETWAY16MV

• Input

  • 220VAC 60Hz, 2.5A.

• Power

  • Sixteen (16) ports of cameras/edge devices over ethernet (CAT5) cable up to a distance of 100m per port.
  • Unit provides up to 30W max. full power per port.
  • Total power: 300W.
  • IEEE 802.3af (PoE) and IEEE 802.3at (PoE+) compliant.
  • Short circuit protection.

• Functions

  • Programmable PoE shutdown for each port. Utilized to reset cameras/edge devices.
  • Auto detection and protection of legacy non-PoE cameras/edge devices.

• Features

  • LAN or laptop connection enables programming of PoE shutdown and port monitoring.
  • User interface.
  • Illuminated master power disconnect circuit breaker with manual reset (switch).
  • Individual port status LEDs.
  • IEC 320 - 3-wire grounded line cord (detachable).

• Temperature

  • Operating: - 20° C to 40° C (-4° F to 104° F).
  • Storage: - 20° C to 70° C (-4° F to 158° F).
  • Relative Humidity 85% +/- 5%.
  • BTU/Hr. (approx.): 154 BTU/Hr.
  • System AC input VA requirement: 550VA.

• Operating Altitude

  • - 304.8 to 3,048m ( - 1,000 to 10,000 ft.).