Altronix NetWay1DWP Single Port High PoE Outdoor Midspan POE Injector

Altronix NetWay1DWP Midspan POE Injector

Altronix NetWay1DWP outdoor single port midspan injector provides Hi-PoE (60W), PoE (30W), and PoE (15W). The unit is ideal for use with outdoor IP cameras and PTZs, WiMAX modems and WLAN access points. NetWay1DWP features a lightweight NEMA 4/4X IP66-11 rated enclosure that can be wall or pole mounted. The unit operates at 115VAC or 230VAC input. Model NetWay1DWPH features enclosure with three (3) 5/8" wiring inlets and includes NEMA rated wire glands.

Key Features of Altronix NetWay1DWP

• Input

  • 115VAC, 60Hz, 1.2A or 230VAC, 50/60Hz, 0.75A.

• Power Output

  • Maximum power: Hi-PoE (60W). Power product using all 4 pairs for 60W.
  • IEEE 802.3at (30W) & IEEE 802.3af (15W) compliant.
  • Integral surge protection.

• Ethernet

  • Connectivity: RJ45, auto-crossover.
  • Wire type: 4-pair Cat5e or higher cable.
  • Distance: up to 100m.
  • Speed: 10/100/1000mbps, half/full duplex, auto negotiation.

• Indicators (LED)

  • LED 1: PoE active on Spare.
  • LED 2: PoE active on Signal.
  • Yellow and Green LEDs (by RJ45 jack):
  • IP Link status, 10/100Base-T/active.

• Temperature

  • Operating:

    • 30W: - 30° C to 70° C ( -22° F to 158° F).
    • 60W: - 30° C to 55° C ( -22° F to 131° F).

  • Storage:

    • - 30° C to 85° C ( -22° F to 185° F).
  • Relative Humidity 85% +/- 5%.

    • System AC input VA requirements:

      • 115VAC: 138VA.
      • 230VAC: 172.5VA.

• Operating Altitude

  • - 304.8m. to 609.6m.