Description
Altronix NetWaySP8WP PoE+ Switch
Altronix NetWaySP8WP Outdoor PoE+ Hardened Switch provides two (2) 1Gb SFP (Fiber) ports and eight (8) PoE+ (30W) or two (2) Hi-PoE (60W) ports, passing data for PoE/PoE+/Hi-PoE compliant devices. Cameras/edge devices may be located up to 100m from the unit. Embedded LINQ Technology allows you to monitor, control and report power and diagnostics from anywhere.
Key Features:
Input
- Voltage: 115VAC, 60Hz, 2.5A or 230VAC, 50/60Hz, 1.3A.
- Fusing: 5A/250V.
Power Output
- Maximum Power: Eight (8) PoE+ (30W) ports or two (2) Hi-PoE (60W) ports.
- IEEE 802.3at (30W) and IEEE 802.3af (15W) compliant.
- 115W total power.
- Integral surge protection.
- Fiber Ports: Two (2) Gigabit SFP ports.
Ethernet Ports
- Six (6) 10/100 Mbps and two (2) 10/100/1000 Mbps ports.
- Connectivity: RJ45, auto-crossover.
- Wire type: 4-pair CAT5 or better structured cable.
- Distance: up to 100m.
- Speed: 10/100/1000 Mbps, half/full duplex, auto negotiation.
Back-up Battery
- (not included)*
- Type: Sealed lead acid or gel type.
- Failover: Upon AC loss, instantaneous.
Indicators (LED)
- Individual PoE On LEDs for each port.
- Individual IP Link status, 10/100Base-T/active LEDs for each port.
- ALOS LED idicates fiber connection for SFP port.
- Heartbeat LED indicates proper operation of the unit.
LINQ Technology
- Remote network management allows for camera/device reset and monitoring.
- Provides local and/or remote access to critical information via LAN/WAN.
- Email and Windows Dashboard Alert notifications report real-time diagnostics.
- Event log tracks history.
Temperature
Operating:
- 60W: - 40° C to 75° C ( - 40° F to 167° F).
- 75W: - 40° C to 70° C ( - 40° F to 158° F).
- 100W: - 40° C to 55° C ( - 40° F to 131° F).
- 115W: - 40° C to 45° C ( - 40° F to 113° F).
- Storage: - 40° C to 85° C ( - 40° F to 185° F).
- Relative Humidity: 85% +/- 5%
- BTU/Hr. (approx.): 61 BTU/Hr.
Operating Altitude
- - 304.8 to 2,000m.
Downloads
Datasheet
Altronix NetWaySP8WP Datasheet
