Altronix Pace1PRMT Long Range Ethernet Over UTP/CAT5e Receiver/Transceiver Adapter Kit

Altronix Pace1PRMT Long Range Ethernet Over UTP/CAT5e Receiver/Transceiver Adapter Kit

Pace1PRMT is a long range Ethernet adapter kit which transmits data at 100mbps full duplex and power via a single twisted pair (UTP) or Cat5e or higher cable in a PoE(+) compliant format. The Pace1PRM receiver is powered via a PoE midspan such as the Altronix Netway series or by an endspan. The receiver passes the PoE(+) compliant power over the cable to the Pace1PTM transceiver which in turn passes this power to an enabled IP camera/device. These plug and play units facilitate cost effective solutions for IP devices that need to be installed at distances greater than 100m. They also provide a simple way to replace legacy analog products with new IP devices over single twisted pair (UTP) or structured cable. Applications: Extend Network link distance in an industrial environment over 700m Retrofit digital IP cameras in an analog CCTV CAT5e wired installations. Works with Megapixel, HD720, HD1080 and VGA (SD) cameras.

Key Features of Altronix Pace1PRMT

• Powered by midspan or endspan
• PoE compliant to IEEE 802.3af (15W) and PoE+ compliant to IEEE 802.3at (30W)
• Connectivity: RJ45, auto-crossover
• Wire type: 4-pair CAT5 or 1 pair UTP structured cable
• Distance: up to 500m (1,600ft.)
• Speed: 10/100BaseT, half/full duplex, auto negotiation. PoE compliant to IEEE 802.3af (15W) and PoE+ compliant to IEEE 802.3at (30W) delivered to camera by Pace1PTM. Power provided by Pace1PRM to Pace1PTM by PoE protocol
• Throughput is rated to pass 100mbps of data at distances up to 500m (1,600ft.)
• Distance: up to 500m (1,600ft.) @ 100mbps
• Distance: up to 152m (500ft.) @ 100mbps
• Green - PoE ON (by respective RJ45 jack)
• Yellow and Green LED IP Link status, 10/100Base-T/active
• (refer to Technical Specifications chart pg. 2)
• Humidity: 20 to 85%, non-condensing
• Auto detection and protection of legacy non-PoE cameras/devices.