Altronix PACE1ST Long Range Ethernet Single Port Small Transceiver

Altronix PACE1ST Long Range Ethernet Single Port Small Transceiver

Pace1ST is a long range Ethernet transceiver designed for use with Pace1PRM, Pace4PRM, Pace8PRM and Pace16PRM receivers. They transmit data at 100mbps full duplex and power via Cat5e or higher cable in a PoE(+) compliant format. The Pace1ST will not deliver power to non compliant devices, thus avoiding damage to improperly connected non-PoE cameras/devices. The receiver passes the PoE(+) compliant power over the cable to the Pace1ST transceiver which in turn passes this power to an enabled IP camera/device. These plug and play units facilitate cost effective solutions for IP devices that need to be installed at distances greater than 100m. Long Range Ethernet Single Port Small Transceiver, 100Mbps per port, Passes PoE/PoE+, Requires Compatible Receiver

Key features of Altronix PACE1ST

• Input

  • PoE (15W) IEEE 802.3af compliant or PoE+ (30W) IEEE 802.3at compliant from Pace1PRM, Pace4PRM, Pace8PRM, or Pace16PRM.

• Ethernet

  • Connectivity: RJ45, auto-crossover.
  • Wire type: 4-pair CAT5e or a single twisted pair UTP.
  • Speed: 10/100BaseT, half/full duplex, auto negotiation. PoE compliant to IEEE 802.3af (15W) and PoE+ compliant to IEEE 802.3at (30W) delivered to camera by Pace1ST.
  • Throughput is rated to pass 100mbps of data.

• CAT5e or Higher

  • Distance: up to 500m @ 100mbps.

• LED Indicators

  • Green - PoE ON (by respective RJ45 jack).
  • Yellow and Green LED IP Link status, 10/100Base-T/active.

• Temperature

  • Operating Temperature:

    • For 15W: - 40° C to 75° C ( - 40° F to 167° F).
    • For 30W: - 40° C to 65° C ( - 40° F to 149° F).
  • Storage Temperature: - 40° C to 75° C ( - 40° F to 167° F).
  • Relative humidity: 20 to 85%, non-condensing.

• Operating Altitude

  • -304.8 to 2000m.

• Functions

  • Auto detection and protection of legacy non-PoE cameras/devices.