Altronix PACE1STR Long Range Ethernet Single Port Adapter Kit

Altronix PACE1STR Long Range Ethernet Single Port Adapter Kit

Altronix Pace1STR is a long range Ethernet adapter kit that transmits data at 100Mbps full duplex and power via CAT5e or higher cable in a PoE(+) compliant format. The Pace1PRM receiver is powered via a PoE midspan, such as the Altronix Netway series, or by an endspan. The receiver passes the PoE(+) compliant power over the cable to the Pace1ST mini transceiver which, in turn, passes this power to an enabled IP camera/ device. These plug and play units facilitate cost-effective solutions for IP devices that need to be installed at distances greater than 100m.

Key Features Of Altronix PACE1STR

• Input (Pace1PRM)

  • Powered by midspan or endspan. PoE compliant to IEEE 802.3af (15W) and PoE+ compliant to IEEE 802.3at (30W).

• Ethernet

  • Connectivity: RJ45, auto-crossover.
  • Wire type: 4-pair CAT5e or higher.
  • Distance: up to 500m.
  • Speed: 10/100BaseT, half/full duplex, auto negotiation. PoE compliant to IEEE 802.3af (15W) and PoE+ compliant to IEEE 802.3at (30W) delivered to camera by Pace1ST. Power provided by Pace1PRM to Pace1ST by PoE protocol.
  • Throughput is rated to pass 100mbps of data at distances up to 500m. With proper headend equipment this supports Megapixel, HD720, HD1080.

• CAT5e or Higher

  • Distance: up to 500m. @ 100mbps.

• LED Indicators

  • Pace1PRM/Pace1ST: Green - PoE ON (by respective RJ45 jack).
  • Pace1PRM and Pace1ST (RJ45 jack): Yellow and Green LED IP Link status, 10/100Base-T/active.

• Functions

  • Auto detection and protection of legacy non-PoE cameras/devices.

• Temperature

  • Operating Temperature:

  • Pace1PRM:

    • - 20° C to +49° C ( - 4° F to 120.2° F).

  • Pace1ST:

    • For 15W: - 40° C to 75° C ( - 40° F to 167° F).
    • For 30W: - 40° C to 65° C ( - 40° F to 149° F).
  • Storage Temperature: - 40° to 75° C ( - 40° to 167° F).
  • Relative humidity: 85% +/-5%.

• Operating Altitude

  • -304.8 to 2000m.