Altronix T2MK7F8Q Access and Power Integration Kit

(No reviews yet) Write a Review
SKU:
T2MK7F8Q
UPC:
782239955657
  • Altronix T2MK7F8Q Access and Power Integration Kit
  • Altronix T2MK7F8Q Access and Power Integration Kit
$649.94
Free Shipping
Technical Support
  • Environmental : Indoor
  • Number of Supported Cameras : 8
  • Output Voltage : DC 24V
  • Input Current : 4.5A
  • Input Voltage : AC 120V
  • Output Current : 9.2A

Description

Altronix T2MK7F8Q Access and Power Integration Kit

Access and Power Integration - Kit includes Trove2 enclosure with TM2 backplane.

Altronix T2MK7F8Q is pre-assembled and consist of Trove2M2 enclosure with factory installed Altronix power supply/charger(s) and sub-assemblies. This kit also accommodate various combinations of Mercury boards for up to eight (8) doors in a single enclosure.

Key features of Altronix T2MK7F8Q

  • Input
    • 120VAC 60Hz/4.5A.
  • Output
    • 24VDC up to 9.2A max current.
    • Eight (8) Fail-Safe/Fail-Secure or Dry Form “C″ Outputs
  • Fully assembled kit includes:
    • Trove2 enclosure with TM2 backplane
    • One (1) eFlow104NB - Power Supply/Charger
    • One (1) LINQ2 - Network Communications Module
    • One (1) ACM8 - Fused Access Power Controller
    • One (1) VR6 - Voltage Regulator
    • One (1) PDS8 - Dual Input Power Distribution Module
  • Back-up Battery (not included)
    • Capacity: 12AH / 12VDC (Up to 4 within enclosure); 40 AH / 65 AH (requires separate enclosure).
    • Type - Sealed lead acid or gel type.
    • Fuse Rating: 15A/32V
    • Failover - Upon AC loss, instantaneous.
  • Supervision
    • AC Failure - Form “C″ contacts.
    • Battery - Form “C″ contacts.
    • Low DC Power Shutdown - Shuts down DC output terminals if battery voltage drops below 71-73% for 12V units and 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge.
  • LED Indicators
    • Input - 120VAC is present.
    • DC Output - Powered.
    • Battery - Discharged or not connected.
  • Temperature
    • Operating 0ºC to 49ºC (32ºF to 120ºF).
    • Storage -20ºC to 70ºC ( -4ºF to 158ºF).
    • Relative Humidity 85% +/- 5%.
    • BTU/Hr. (approx.): 145 BTU/Hr.
Dimensions (approximate):
  • 27.25"W x 21.75"L x 6.5"H (692.15 mm W x 546.1 mm L x 165.1 mm H).
Weights (approximate):
  • Product Weight: 40.5 Lbs. (18.37 kg).
  • Shipping Weight: 44.25 Lbs. (20.1 kg).


View AllClose

Additional Information

Accessory Type:
Power Supply
Environmental:
Indoor
Input Current:
4.5A
Input Voltage:
AC 120V
Number of Supported Cameras:
8
Output Current:
9.2A
Output Voltage:
DC 24V
Warranty:
Life-time Warranty
View AllClose

Customers Also Viewed