Description
ETS ETW-625-TB Weather Proof Dynamic Microphone - Terminal block
The ETW-625 is a un-pre-amplified flush mount, low impedance, dynamic, omnidirectional, weather proof (IP55), vandal resistant, microphone for indoor / outdoor applications.
Key Features:
- Dynamic (moving coil) cartridge
- Omni-directional pickup pattern
- 100-10khz frequency response
- -60db sensitivity
- 200 Ohm impedance
- Temperature range –25 to 85C
- Dimensions L4.50 x W2.75 x H2.03
- Weight .2lbs
Packing List:
- ETW-625 Microphone.
- Sealing gasket
- Vandal resistant screws
- Warning label.
- Installation instructions.
Wiring requirements:
2 conductor shielded (with drain wire) 22 gauge stranded. Max cable length 500’
Options:
- Terminal block or flying leads output Add –TB or –FL to Part number
- Normally open call switch Add –CS to part number
IMPORTANT
NOTE
All of ETS items are special built to order items. The moment the order is sent to ETS, they will start production/building. This will take around 1-2 weeks depending on the line of production, volume of your order, etc. Please plan accordingly. We will enter tracking as soon as it becomes available to us. If you have any questions feel free to contact the customer service team at customerservice@a1securitycameras.com or call us at 214-948-1300 x 411.
Downloads
Datasheet
ETS-ETW-625-TB-Datasheet-A1
