ETS ML1-S-15FT Flush Mount Omni-Directional Microphone with 15 feet cable

ETS ML1-S-15FT Flush Mount Omni-Directional Microphone with 15 feet cable

The ML1-S is a low cost omni-directional electret microphone for use with IP cameras accepting microphone level input signals (PC compatible input). The attached cord is 6' long and comes standard with a stereo 3.5mm connector on one end. Add -FL to the P/N for a flying lead output for connections to cameras with terminal blocks.

With the all new ETS ML1-S Surface Mount Omni Directional Surveillance Microphone by your side you are never short of excellent quality. This microphone provides you with incredible features at a low-cost that will leave you amazed. Plug it in with all I/P cameras that accept microphone level input signals. The ETS ML1-S microphone comes with a 6-feet long cord that allows greater movement. It is also coupled with a stereo 3.5mm connector on an end. If you plan to connect the cord directly to cameras with terminal blocks all you will need to do is to remove the connector. It cannot be easier than that!

Offering a frequency response up to 20-16KHz, this ETS ML1-S microphone also ensures an audio range of up to 25 feet. It has a standard electrical "single gang" cover plate, and can be installed easily on any surface mount. This ETS ML1-S Surface Mount Omni Directional Surveillance Microphone is also great for use on a PC's microphone input.

Key Features:

• Omni-directional pattern
• Max SPL 120db
• Frequency response: 50-16khz
• Sensitivity -43db
• -40db output (mic level)
• 2-10Vdc operation
• 2-5k Ohm load resistance
• S/N 60db
• 6’ standard cable length
• 3.5mm stereo connector
• White plastic Single gang plate
• Operating temperature -30 to 70 C
• Weight: 0.025 lbs

** Note-camera must accept electret type microphone inputs (camera supplies power to ECM cartridge)**

This product is also associated with:
ETS