Pelco EH2512-2 Dust-Proof Security Camera Enclosure - Heater/Defroster, 24VAC

Pelco EH2512-2 Dust-Proof Security Camera Enclosure - Heater/Defroster, 24VAC

The enclosures of the EH2500 Series are rain- and dustproof to protect CCTV cameras from adverse environmental conditions. Constructed from aluminum, the enclosures are compact and lightweight. They can be installed on fixed mounts or pan/tilt units.

The EH2500 Series can accommodate a variety of cameras with fixed focal length or motorized zoom lenses. The enclosures have an outside diameter of 4.25 inches (10.80 cm) and are available in three lengths: 8 inches (20.32 cm), 12 inches (30.48 cm), and 15 inches (38.10 cm).

Each model features a sled for camera mounting and a T-handle on the rear plate to assist in removing the plate during installation and servicing.

Cable entry is through two adjustable cable glands located conveniently on the rear plate.

Key features of Pelco EH2512-2

• Designed for Maximum Rain Protection
• Dust proof
• Compact, Lightweight
• Aluminum Construction
• Meets NEMA Type 4 and IP66 Standards
• Accepts Cameras with Fixed Focal Length or Motorized Zoom Lenses
• Heaters: 1 - On at 40°F (4°C), off at 67°F (19°C)
• Maximum Power Consumption: 15W
• Finish: Gray polyester powder coat
• Environment: Indoor/outdoor
• Camera Mounting: Multiple mounting holes on removable camera sled
• Latching: Two captivated screws
• Viewing Window: 0.375 (0.95 cm) thick Lexan
• Viewing Window Area: 2.50" (6.35 cm) diameter
• Cable Entry: Two adjustable 1/2-NPT liquid-tight glands
• Connector: 4-position terminal block
• Dual element heater is thermostatically controlled
• Defroster, activates on at 70°F (21°C), off at 85°F (29°C)
• Input Voltage: 24 V AC
• Weight (Approximate): 3.90 lb