Pelco EH3512-2-MT 12" Outdoor Enclosure with 24VAC Heater, Defroster & Blower, Wall Mount

Pelco EH3512-2-MT 12" Outdoor Enclosure with 24VAC Heater, Defroster & Blower, Wall Mount

Pelco EH3512, EH3512-1HD, EH3512-2HD Series are indoor/outdoor, low-cost camera enclosures constructed from die cast and extruded aluminum. These housings include factory installed heater-defroster. The EH3512 has an exterior lower body length of 12.75 inches (32.38 cm). These enclosures are for use with 2/3-inch, 1/2-inch, and 1/3-inch format cameras and fixed focal length lenses or motorized zoom lenses (with or without auto-iris operation).

The front hinged lid provides easy access to the removable camera sled. Two adjustable (PG13.5) glands on the bottom of the enclosure allow for easy installation of the power and video cables. The rear link-lock latch can be used with a padlock of suitable size to secure the enclosure.

Field installed options include heater-defroster, blower, and sun shroud. The enclosures can also be factory ordered with a low power 24V, 120V, or 230V heater-defroster and blower or heater-defroster only.

The EH3512 is ideal for small-to-medium cameras and fixed mount applications.
Maximum Lens and Camera Combination including BNC connector, H x W x L inches: EH3512: 3.00 x 2.87 x 10.25 EH3512-1HD/EH3512-2HD: 3.00 x 2.87 x 10.00&

Key Features:

• Low Cost

• Small, Contemporary Design&

• Die Cast and Extruded Aluminum Construction

• Heater Defroster Included

• Mount& Included

• Forward Opening Hinged Lid&

• Rear Link-lock Latch&

• Cable Entry Glands and Mounting Holes on Bottom of Enclosure&

• Designed for Indoor/Outdoor Fixed Mount Applications; Not for use with Pan/Tilt&

• Easy Access for Servicing and Installation&

• Models Available with Factory Installed Low Power Heater and Defroster