Speco SX600 600W Solar Powered Camera Enclosure System with PoE Switch and 4G LTE Router

Speco SX600 600W Solar Powered Camera Enclosure System with PoE Switch and 4G LTE Router

The Speco SX600 is a 600W solar power system built for continuous operation at remote off-grid surveillance sites. It combines a pole-mounted solar array with a weatherproof enclosure that houses the charge controller, a factory-installed PoE switch, power converters, and an industrial 4G LTE router. Because the networking and power distribution hardware ships pre-installed, the system arrives ready for camera connection rather than requiring on-site integration of separate components.

The 600W array is configured either as six 100W panels or three 200W panels depending on the option selected, delivering enough continuous generation for multi-camera sites and high-load edge network hardware. Power management uses an integrated MPPT (Maximum Power Point Tracking) charge controller for efficient conversion across varying light and battery conditions.

The enclosure measures 21.5" H x 16" W x 14.5" D and weighs approximately 28 lbs empty, with an internal battery bay accommodating either two or four 100Ah batteries depending on internal layout (batteries measure 9.2" H x 12.3" W x 6.7" D and are not included). Panels measure 40" x 27" in the 100W configuration or 59" x 27" in the 200W configuration, with a mounted array weight of approximately 60 to 75 lbs and a complete kit shipping weight near 120 lbs. The system mounts to 3" to 6" Schedule 40 rigid metal poles, withstands wind loads up to 100 MPH, and operates from -40°F to 140°F.

Key Features:

• 600W solar array in six 100W or three 200W panel configurations; supplies continuous power for multi-camera off-grid sites.
• Integrated MPPT charge controller; maximizes conversion efficiency across varying light levels and battery states.
• Factory-installed PoE switch and power converters; connects and powers cameras directly from the enclosure without separate hardware.
• Industrial 4G LTE router included; provides cellular connectivity at sites with no wired network access.
• Weatherproof enclosure, 21.5" x 16" x 14.5"; protects switch, router, converters, and charging equipment from weather and tampering.
• Battery bay for two or four 100Ah batteries (not included); supports configurable autonomy for the connected load.
• 100 MPH wind rating on 3" to 6" Schedule 40 poles; withstands severe weather at exposed installations.
• Operating range of -40°F to 140°F; suits year-round deployment across most North American climates.