Speco SX800 800W Solar Powered Camera Enclosure System with MPPT Charge Controller

Brand: Speco
Part Number: SX800
Write a Review
New Product!
$7,511.11
Free shipping over $300 Free Shipping
  • Material : Aluminum

Description

Speco SX800 800W Solar Powered Camera Enclosure System with MPPT Charge Controller

The Speco SX800 is an 800W solar power system designed for off-grid security and camera installations at remote sites. It combines a solar panel array with a weatherproof aluminum enclosure and an advanced MPPT charge controller, representing the highest-capacity array in Speco's SX product family. The system supplies continuous power for multi-camera sites, high-draw PTZ cameras, cellular routers, and PoE switches, including in regions with lower average solar radiation.

Power management uses an MPPT (Maximum Power Point Tracking) charge controller to maximize solar-to-battery energy conversion, with charging profiles optimized for both LiFePO4 lithium iron phosphate and standard sealed lead-acid batteries. The internal battery bay accommodates up to two 100Ah batteries, which are sold separately; battery chemistry significantly affects total installed weight, with SLA units adding roughly 66 lbs each against approximately 24 lbs for LiFePO4.

The aluminum enclosure measures 21.5" H x 16" W x 14.5" D and weighs approximately 28 lbs empty. The array consists of four 200W high-efficiency monocrystalline panels measuring 59" x 27" each, rated to withstand 100 MPH wind loads and mounted on 3" to 6" Schedule 40 poles. Operating range spans -40°F to 140°F. Cameras and batteries are not included; the factory-integrated PoE switch and 4G LTE cellular router are available on the SXC and SXP series rather than this model.

Key Features:

  • 800W solar array with four 200W monocrystalline panels; the highest generation capacity in Speco's SX product family.
  • MPPT charge controller; maximizes solar-to-battery conversion efficiency across varying light and battery conditions.
  • Dual battery chemistry support; optimized charging profiles for both LiFePO4 and sealed lead-acid batteries.
  • Weatherproof aluminum enclosure, 21.5" x 16" x 14.5"; protects the charge controller and wiring from weather and tampering.
  • Internal bay for two 100Ah batteries (sold separately); supports configurable autonomy for the connected load.
  • Sized for high-draw loads; supports multi-camera sites, PTZ cameras, cellular routers, and PoE switches.
  • 100 MPH wind rating on 3" to 6" Schedule 40 poles; withstands severe weather at exposed installations.
  • Operating range of -40°F to 140°F; suits year-round deployment across most North American climates.

Additional Information

Accessory Type:
Solar Power Kit
Dimensions:
21.5x16x14.5in
Material:
Aluminum
Operating Temperature:
-40 °C to 60 °C (-40 °F to 140 °F)
View AllClose