Speco SXC600 600W Solar Powered Camera Enclosure System with PoE Switch and 4G Router

Brand: Speco
Part Number: SXC600
Write a Review
New Product!
$7,532.22
Free shipping over $300 Free Shipping
  • Material : Aluminum

Description

Speco SXC600 600W Solar Powered Camera Enclosure System with PoE Switch and 4G Router

The Speco SXC600 is a complete 600W solar power and connectivity system for IP camera deployments at sites with neither utility power nor wired network access. It pairs a pole-mounted solar array with a weather-proof aluminum enclosure housing the charge controller, PoE switch, converters, and a 4G router powered by Cradlepoint. Solar panels and mounting hardware are included, as is the enclosure mounting hardware, so the system arrives ready to deploy rather than as a set of components requiring on-site integration.

Power management uses an advanced solar charge controller with a Maximum Power Point Tracking (MPPT) algorithm, optimizing array output against battery state and ambient conditions. The integrated PoE switch supports IEEE 802.3af devices up to 15.4W and IEEE 802.3at devices up to 25.5W, powering up to four PoE IP cameras with a total budget of 120W. Available power for camera use varies by solar zone, from 74W in the sunniest regions down to 23W in Zone 4; Zone 5 is not supported, and the system is not recommended for Alaska or Canada.

The aluminum enclosure measures 32" (H) x 24" (W) x 16" (D) and weighs 38 lbs, accommodating up to four 100Ah batteries (batteries not included; each measures 9.2" H x 12.3" W x 6.7" D). It secures with a lockable wing-knob accepting a standard padlock (padlock not included) and mounts to a 3" to 6" Schedule 40 rigid metal pole or stronger, with straps not included. The array consists of six 100W panels measuring 40" x 27" each with a combined weight of 120 lbs, rated to 100 mph wind. Operating range spans -40°F to 140°F. The system carries network operator certifications for AT&T, T-Mobile, and Verizon; a SIM card is not included.

Key Features:

  • 600W solar array with six 100W panels and mounting hardware included; provides grid-independent power for remote IP camera sites.
  • Integrated 4G router powered by Cradlepoint; delivers cellular connectivity where no wired network is available.
  • MPPT solar charge controller; maximizes charge efficiency against battery state and ambient conditions.
  • Hardwired PoE switch supporting IEEE 802.3af (15.4W) and 802.3at (25.5W); powers up to four PoE IP cameras with a 120W total budget.
  • Weather-proof aluminum enclosure, 32" x 24" x 16"; safeguards switch, router, converters, and charging equipment from weather and tampering.
  • Lockable wing-knob closure accepting a standard padlock; deters unauthorized access at unattended sites.
  • Capacity for four 100Ah batteries (not included); supports extended autonomy through low-sunlight periods.
  • AT&T, T-Mobile, and Verizon network operator certifications; simplifies carrier selection for cellular service (SIM card not included).
  • 100 mph panel wind rating on 3" to 6" Schedule 40 poles; withstands severe weather at exposed installations.
  • Operating range of -40°F to 140°F; suits year-round deployment across most North American climates.

Downloads

Additional Information

Accessory Type:
Solar Power Kit
Dimensions:
32x24x16in
Material:
Aluminum
Operating Temperature:
-40 °C to 60 °C (-40 °F to 140 °F)
PoE Standards:
IEEE 802.3af IEEE 802.3at
View AllClose