Videocomm TCO-L1EV2409 2.4GHz Digital FHSS Wireless Elevator Video System - Range 200 Floors

Videocomm TCO-L1EV2409 2.4GHz Digital FHSS Wireless Elevator Video System - Range 200 Floors

This all-weather 2.4GHz Frequency Hopping Spread Spectrum (FHSS) wireless digital video solution sends Real-Time D1 (720 x 480) high-resolution video up to 2,500 Feet Line-of-Sight. Perfect for the most extreme mobile applications including, elevator surveillance, robotics and sporting events.

Advantages:

• Great solution to economically upgrade existing hard wired elevator cameras
• Reduce Liability by increasing occupants safety and security
• Economical solution to deter vandalism & criminal behaviour
• Easy integration with existing surveillance systems for anytime/anywhere monitoring
• Installs in a few hours, minimize elevator down time.
• No Connections to the Elevator Mechanics or Traveling Cable
• No Maintenance or Inspections Required
• 100% Performance Guarantee
• Complies with TSSA, ASME & FCC Safety Standards

Key Features:

• Operating Frequency:2.4GHz - 2.48GHz Digital Frequency Hopping Spread Spectrum
• Modulation:FHSS (16 QAM, QPSK, BPSK)
• Frequency Control:Automatic 9-Channel
• Security Authentication System:Automatic Rolling Encrypted Authentication System
• Latency:200-500ms (Signal Dependant)
• Video Compression:Hardware Based MPEG-4
• Resolution:D1 720 x 480 (NTSC)
• Frame Rate:30fps (NTSC)
• Radiated Power:125mW
• Range & Elevation (Line of Sight):Up to 200 Floors
• Sensitivity:-85dBmCamera Type:Not Included
• Antenna Type:Omnidirectional Rubber Duck
• Video Connector:BNC-Female @ 75 Ohms 1 Volt P-P
• Audio Connector:BNC-Female @ 600 Ohms 1 Volt P-P
• Baud Rate:Rotary-Switch 1200 / 2400 / 4800 / 9600
• PTZ Data Protocol:RS-485 2-Wire Pelco-D / Pelco-P
• Power Supplies Included:TWO x 12VDC 1.25Amp Power Supplies Class V CEC
• Tx & Rx Operating Voltage:9-15VDC - Polarity & Surge Protected
• Tx & Rx Current Consumption:500mA @ 12VDC
• Tx & Rx ConstructionIP-67 Rated All-Weather Design
• Tx & Rx Dimensions:7.0” x 7.0” x 4.0” (178mm x 178mm x 102mm) Each Enclosure
• Tx & Rx Weight:Transmitter: 29oz (820g) Receiver: 31oz (890g)
• Tx & Rx Mounting Brackets:Universal Stainless Steel Wall / Pole Mount - Model # BRK-250
• Operating Temperature Range:-40ºF to +170ºF (-40ºC to 77ºC)
• FCC / IC Approved:License Free - Professional Installation (CE Version Available)

Includes:

• 1x ALL-WEATHER TRANSMITTER
• 1x ALL-WEATHER RECEIVER
• 2x Rubber Duck Antennas
• 1x 25 Foot Siamese Video & Power Cable
• 2x 12VDC POWER SUPPLIES
• 2x UNIVERSAL MOUNTING BRACKET
• OWNER’S MANUAL
• ONE YEAR WARRANTY
• 100% PERFORMANCE GUARANTEE

Note: Complies with TSSA, ASME & FCC Safety Standards