2Gig 2GIG-CAM-HD100 1MP Wireless Indoor Cube IP Security Camera - PIR Motion

2Gig 2GIG-CAM-HD100 1MP Wireless Indoor Cube IP Security Camera

The 2GIG CAM-HD100 is a 720P HD indoor camera with night capabilities. There is a built-in PIR motion detector and IR illuminator for night vision. Both of these technologies has a maximum range of 5 meters. The camera is designed for remote access and cloud storage using Alarm.com. Also, it is ethernet (10/100Mbps) and WIFI ready.

Traditionally, IP cameras that support WIFI require a WPS (WIFI Protected Setup) button on the WIFI router for internet configuration. Although the camera supports WPS WIFI enrollment, it does not require it. The camera can be temporarily hardwired via ethernet to the WIFI router. Using a PC, you can configure the camera for WIFI configuration. After it is setup for WIFI via the alarm.com website, you can remove the ethernet cable.

The CAM-HD100 will stream video via the WIFI network, it still requires a wired power connection. There is an included 12VDC 1A power supply with a male DC plug which connects to the camera's power port. If you need to extend the power cable it is recommended that you use 18 gauge stranded cabling with cleanly crimped connections. The LED on the front of the camera should be solid green when in normal operation. The LED will blink red when there are connectivity issues with the network. During the WPS pairing process, the LED should be blinking yellow. Lastly, during the initial boot up sequence the LED is solid yellow.

Key features:

• 720p resolution HD video
• Wireless and Ethernet network connections
• Configurable video motion detection
• PIR motion detection enhancement
• Access live video and saved clips on remote services provider's website or mobile device
• IR for viewing in low-light conditions
• Easy setup using WPS push button configuration
• Requires Alarm.com service plan

Notice: ALARM SYSTEM EQUIPMENT IS INTENDED TO BE INSTALLED BY A LICENSED PROFESSIONAL, WE DO NOT PROVIDE END USER TROUBLESHOOTING SUPPORT IF SYSTEM WAS NOT INSTALLED BY A LICENSED INSTALLER. PLEASE VISIT https://www.nortekcontrol.com/support/technical-support FOR ANY QUESTIONS YOU MAY HAVE ABOUT SYSTEM DESIGN.