Altronix MAXIMAL75 Access Power Controller with Power Supply/Chargers

Brand: Altronix
Part Number: MAXIMAL75
Write a Review
  • Altronix MAXIMAL75 Access Power Controller with Power Supply/Chargers - 1
  • Altronix MAXIMAL75 Access Power Controller with Power Supply/Chargers - 2
$1,741.72
$905.35
— You save $836.37
Free shipping over $300 Free Shipping
Technical Support Technical Support
Lifetime Warranty Lifetime Warranty
  • Output Voltage : 24VDC
  • Input Current : 7A
  • Input Voltage : 115VAC
  • Access Control Type : Access Power Controller
  • Output Current : 9.7A

Description

Altronix MAXIMAL75 Access Power Controller with Power Supply/Chargers

Maximal Access Power/Controllers distribute and switch power to access control systems and accessories. They convert a 115VAC 60Hz input into sixteen (16) independently controlled 12VDC or 24VDC fuse protected outputs. These Fail-Safe/ Fail-Secure power outputs may be converted to dry form “C″ contacts. The outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Keypad, Push Button, REX PIR, etc. Units will route power to a variety of access control hardware devices including: Mag Locks, Electric Strikes, Magnetic Door Holders, etc. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the sixteen (16) outputs.

Key Features:

  • 115VAC 60Hz, 7.0 amp input
  • 12VDC and 24VDC outputs
  • Sixteen (16) auxiliary power outputs (unswitched) (outputs are rated 2.5 amp)
  • Filtered and electronically regulated outputs (built-in power supply)
  • Thermal and short circuit protection with auto reset
  • ACM8 boards main fuse is rated at 10 amp output fuses are rated @ 3.5 amp
  • AC fail supervision (form “C″ contact)
  • Low battery and battery presence supervision (form “C″ contact)
  • Built-in charger for sealed lead acid or gel type batteries
  • Automatic switch over to stand-by battery when AC fails
  • Zero voltage drop when unit switches over to battery backup (AC failure condition)
  • Red LEDs indicate outputs are triggered(relays energized)
  • Green LED indicates FACP disconnect is triggered
  • AC input and DC output LED indicators

Additional Information

Access Control Type:
Access Power Controller
Accessory Type:
Power Supply
Input Current:
7A
Input Voltage:
115VAC
Output Current:
9.7A
Output Voltage:
24VDC
Warranty:
Life-time Warranty
View AllClose