Altronix T2AMK7F8 Trove2 Access & Power Integration Kit for AMAG with 24VDC 10A Power Supply/Charger

Altronix T2AMK7F8 Trove2 Access & Power Integration Kit for AMAG with 24VDC 10A Power Supply/Charger

The Altronix T2AMK7F8 is a Trove2-based access and power integration kit engineered for AMAG access control systems. It combines a Trove2 enclosure with a TAM2 AMAG/Altronix backplane, a 24VDC @ 10A power supply/charger, a fused access power controller, a voltage regulator, and a dual-input fused power distribution module in a single, pre-engineered assembly. This consolidation streamlines board layout and wire management, reducing installation time and labor costs on the job site.

Built around a 16-gauge galvanized steel backplane, the kit accommodates a range of AMAG M2150 modules to support up to eight doors from one enclosure. The integrated power supply/charger delivers filtered and regulated 24VDC with overvoltage protection, while the access power controller provides eight independently controlled fused outputs that can be configured as fail-safe, fail-secure, or auxiliary power. Onboard supervision reports AC failure, low battery, and battery presence, and a low-power shutdown protects connected batteries from deep discharge. The enclosure also houses up to four 12VDC/12AH batteries for instantaneous failover on AC loss. Note that AMAG boards are not included.

All Altronix components in this Trove kit are UL Listed sub-assemblies, carrying UL294 Access Control System and cUL CAN/ULC s319-05 listings along with CE conformity, and are backed by a lifetime warranty on Altronix power supply/chargers and sub-assemblies.

Key Features:

• 24VDC @ 10A power supply/charger; delivers filtered, regulated power for demanding multi-door installations.
• Supports up to eight (8) doors in a single enclosure; consolidates hardware and reduces panel count.
• TAM2 AMAG/Altronix backplane for M2150 modules; simplifies integration with AMAG access control.
• Eight independently controlled fused outputs, fail-safe/fail-secure selectable; adapts lock power to each door's life-safety requirement.
• Dual-input fused power distribution module with 12VDC and 24VDC outputs; feeds mixed-voltage peripherals from one board.
• Voltage regulator providing 12VDC @ 6A; powers 12V devices without a separate supply.
• Supervision for AC failure, low battery, and battery presence with low-power shutdown; protects batteries and flags faults.
• Houses up to four 12VDC/12AH batteries with instantaneous failover; maintains access control during power outages.
• 16-gauge galvanized steel backplane; organizes board layout and speeds wire management.
• UL294 and cUL CAN/ULC s319-05 listed, CE conformity, lifetime warranty; meets access control code requirements with long-term reliability.