Altronix T2KK3F8Q 8-Door Altronix/Keyscan Access and Power Integration Kit - Trove2KA2 with eFlow6NB - LINQ2
Altronix T2KK3F8Q is pre-assembled and consists of Trove2 enclosure with factory installed Altronix power supply/chargers, transformer, and sub-assemblies. These kits also accommodates various combinations of Keyscan boards for up to eight (8) doors in a single enclosure.
- 120VAC 60Hz/3.5A.
- 24VDC up to 5.8A max current.
- Eight (8) Fail-Safe/Fail-Secure or Dry Form C Outputs.
Fully assembled kit includes:
- Trove2 enclosure with TKA2 backplane
- One (1) eFlow6NB - Power Supply/Charger
- One (1) LINQ2 - Network Communications Module
- One (1) ACM8 - Fused Access Power Controller
- One (1) T16100 Transformer
Back-up Battery (not included)
- Capacity: 12AH / 12VDC (Up to 4 within enclosure); 40 AH / 65 AH (requires separate enclosure).
- Type - Sealed lead acid or gel type.
- Fuse Rating: 10A/32V.
- Failover - Upon AC loss, instantaneous.
- AC Failure - Form C contacts.
- Battery - Form C contacts.
- Low DC Power Shutdown - Shuts down DC output terminals if battery voltage drops below 71-73% for 12V units and 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge.
- Input - 120VAC is present.
- DC Output - Powered.
- Battery - Discharged or not connected.
- Operating 0ºC to 49ºC (32ºF to 120ºF).
- Storage -20ºC to 70ºC ( -4ºF to 158ºF).
- Relative Humidity 85% +/- 5%.
- BTU/Hr. (approx.): 111 BTU/Hr.