Altronix T3SK7516D 16-Door Altronix/Software House Access and Power Integration Kit

Altronix T3SK7516D 16-Door Altronix/Software House Access and Power Integration Kit

This kit includes: Trove3SH3 with AL1024ULXB2, AL1012ULXB, 2-ACM8CB, PD8ULCB, RSB2

Altronix T3SK7516D kit consists of Trove3 enclosure and TSH3 Software House/Altronix backplane with 24VDC @ 10A and 12VDC @ 10A power supply/chargers, two eight (8) PTC protected output access control modules and eight (8) PTC protected output power distribution module. This kit also accommodates various combinations of Software House boards for up to sixteen (16) doors in a single enclosure. Trove simplifies board layout and wire management, reduces installation time and labor costs.

Key Features:

• AL1024ULXB2 Power Supply/Charger - 1

  • Input

    • Voltage: 115VAC, 60Hz, 4.2A max.
    • Main Fuse: 5A / 250V.

  • Output

    • Voltage: 24VDC.
    • Current: 10A @ 24VDC continuous max.
    • Other: Overvoltage protection. Filtered and regulated.

• AL1012ULXB Power Supply/Charger - 2

  • Input

    • Voltage: 115VAC, 60Hz, 2.6A max.
    • Main Fuse: 5A / 250V.

  • Output

    • Voltage: 24VDC.
    • Current: 10A @ 12VDC continuous max.
    • Other Overvoltage protection. Filtered and regulated.

• Both Power Supplies

  • Battery Backup (not included)

    • Capacity: 7AH /12VDC (4 within enclosure); 40 AH / 65 AH (requires separate enclosure).
    • Type: Sealed lead acid or gel type.
    • Failover: Upon AC loss, instantaneous.

  • Supervision

    • AC Failure: Form “C” contacts.
    • Battery: Form “C” contacts.

  • Indicators LED

    • Input: 115VAC is present.
    • DC Output: Powered.
    • Battery: Discharged or not connected.

• Two (2) ACM8CB Access Power Controllers

  • Input

    • Voltage: 24VDC from AL1024ULXB2.
    • Main Fuse: 10A / 250V.

  • Outputs

    • Class 2 power-limited auto-resettable outputs.
    • Voltage: 24VDC.
    • Eight (8) 24VDC independently controlled PTC outputs:
    • a) Fail-Safe and/or Fail-Secure power outputs. Form “C” Relays rated 28VAC or VDC @ 2.5A.
    • b) Any combination of the above.
    • Output PTCs: 2.5A.

  • Indicators (LED)

    • Red LEDs: Outputs are triggered (relays energized).
    • Green LED: FACP disconnect is triggered.

• PD8ULCB Power Distribution Module

  • Input

    • Voltage: 12VDC from AL1012ULXB.

  • Outputs

    • Voltage: 12VDC.
    • PTCs: 2.5A.

  • Indicators LED

    • Green LED: DC Output.

• Environmental

  • Temperature

    • Operating: 0° C to 49° C (32° F to 120° F).
    • Storage: - 20° C to 70° C ( - 4° F to 158° F).

  • Relative Humidity

    • Relative Humidity 85% +/- 5%.

  • BTU/Hr (approx.):

    • 217 BTU/Hr.