Description
Altronix T3SK75F16D 16-Door Altronix/Software House Access and Power Integration Kit - Trove3SH3 with EFLOW104NB - EFLOW102NB
Altronix T3SK75F16D is pre-assembled and consists of Trove3 enclosure with factory installed Altronix power supply/chargers and sub-assemblies. These kits also accommodates various combinations of Software House boards for up to sixteen (16) doors in a single enclosure.
Key Features:
Input
- 120VAC 60Hz/8.0A.
Output
- 24VDC up to 9.2A max current.
- sixteen (16) Fail-Safe/Fail-Secure Auto-Resettable Outputs
Fully assembled kit includes:
- Trove3 enclosure with TSH2 backplane
- One (1) eFlow104NB - Power Supply/Charger
- One (1) eFlow102NB - Power Supply/Charger
- Two (2) ACM8CB - PTC Protected Access Power Controllers
- One (1) PD8ULCB - PTC Protected Power Distribution Module
- One (1) Rocker Switch Bracket with Two (2) Rocker Switch
Back-up Battery (not included)
- Capacity: 12AH / 12VDC (Up to 4 within enclosure); 40 AH / 65 AH (requires separate enclosure).
- Type - Sealed lead acid or gel type.
- Fuse Rating: 15A/32V.
- Failover - Upon AC loss, instantaneous.
Supervision
- AC Failure - Form C contacts.
- Battery - Form C contacts.
- Low DC Power Shutdown - Shuts down DC output terminals if battery voltage drops below 71-73% for 12V units and 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge.
LED Indicators
- Input - 120VAC is present.
- DC Output - Powered.
- Battery - Discharged or not connected.
Temperature
- Operating 0ºC to 49ºC (32ºF to 120ºF).
- Storage -20ºC to 70ºC ( -4ºF to 158ºF).
- Relative Humidity 85% +/- 5%.
- BTU/Hr. (approx.): 177 BTU/Hr.
Downloads
Datasheet
Altronix T3SK75F16D Datasheet