AXIS 2N External Secured RFID Card Reader 125kHz + 13.56MHz with NFC (USB) - 01527-001

AXIS 2N External Secured RFID Card Reader 125kHz + 13.56MHz with NFC (USB) - 01527-001

External secured RFID card reader from 2N for connection to the Axis access control and body worn systems using the USB interface.

For bodyworn systems, the self-assign functionality lets the camera user assign and pick up any available body worn camera in the system using an RFID card. This feature allows different work shifts to share cameras in a fast and easy way.

For access control card enrollment, the reader lets the operator easily add new cardholders or visitors to the system and assign cards. Suitable for enrollment of 125kHz and 13.56MHz RFID cards. 

Supported cards:
ISO/IEC 14443A Mifare Classic 1k & 4k, DESFire EV1, Mini, Plus S&X, Ultralight, Ultralight C
ISO/IEC 14443B CEPAS, HID iCLASS (reads CSN and also PACs ID)
JIS X 6319 Felica

Reader type: Multitech TWN4

Note, reader marked TWN4 Multitech 2 LF HF requires at least FW 10.12 or later.

Key Features:

• USB for easy connection
• Small for easy placement
• Multi card system support
• Support for HID® iClass®
• Powerful SDK for writing apps which are executed directly on the reader
• Firmware update in the field possible
• On-board 18 kB flash storage, e.g. for storing user accessible non-volatile data
• Direct chip-commands support
• Two on-board SAM sockets (Secure Access Module)
• Supports quick (re)configuration over network and over wireless interface with TWN4 CONFIG Card
• TWN4 Upgrade Card for P and PI options available on request
• 3D construction data (STEP) available on request
• Available as desktop version