AXIS T93F10 Outdoor Housing 5900-271

AXIS T93F10 Outdoor Housing 5900-271

AXIS T93F10 Outdoor Housing supports IP66 and NEMA 4X ratings against the ingress of dust and water, and IK10 rating for protection against impact and vandal acts. The installer-friendly, lightweight plastic casing protects from corrosion. All cables are protected inside the wall mount to enhance vandal protection and remove the risk of solar degradation. A slot is dedicated for an optional intrusion alarm switch. It comes with a wall mount and an integrated sunshield.

AXIS T93F10 Outdoor Housing can power the camera and its heater and has a temperature range from -40 °C to 60 °C (-40 °F to 140 °F) for the housing itself. The temperature range in running operation depends on the camera model. For more information please check the datasheet. The housing can power the camera at 12 V DC. AXIS T93F10 is suitable when AC/DC power is a requirement. The outdoor housing can be powered with 20-24 V AC or 12-28 V DC and no midspan is required.

As optional accessory, AXIS Corridor Format Bracket B can be purchased if the fixed box camera needs to be installed in a corridor format, but keeping the housing straight. The corridor format installation is particularly suitable for surveillance of narrow alleys or perimeters. For a list of cameras that can be installed using AXIS Corridor Format Bracket B, see the product page of the bracket.

Key Features:

• AC or DC power input
• 12 V DC power output
• Weatherproof and vandal-proof
• Suitable to fit large CS-mount lenses
• Polymer casing
• Protection against water, dust and corrosion
• Impact resistant
• Lightweight
• Included wall mount

Optional Accessories:

• AXIS T91A47 Pole Mount
• AXIS Sunshield A
• AXIS Corridor Format Bracket A/B
• AXIS Bird Control Spike

Supported products:

• AXIS P13 Series
• AXIS Q16 Series
• AXIS M1124/M1125