Bosch APC-AMC2-4WCF Door controller Wiegand with CF card

Bosch APC-AMC2-4WCF Door controller Wiegand with CF card

Key Features

• Intelligent access manager for one to eight entrances
• Four interfaces include the reader power supply
• Standard 2 GB Compact Flash
• LCD display for displaying information
• Self-controlling send and receive switching
• Individual electronic verification of plugs and outputs
• Input for an externally connected tamper contact

The AMC2 (Access Modular Controller) is used as an access controller in the access control systems:

• BISACE (Access Engine) from version 2.0 onward
• AMS (Access Management System)
• APE (Access Professional Edition).

The device controls a group of one to eight access points. These access points, also known as entrances, can be:

• doors
• gates
• barriers
• turn stiles
• revolving doors
• mantraps
• ID card, PIN and biometric readers
• door opening elements
• sensors.

The AMC2 can control a maximum of eight ID readers (depending on the reader type) and fully processes the access logic at the assigned entrances. The analog inputs have a status recognition of the connected lines. The relay outputs activate the door opening elements and/or generate the security activation and signaling. The AMC2 stores all necessary information in a battery-buffered memory and a compact flash storage element. Thus, even when the unit is offline, it checks independent authorization on access points, takes access decisions, controls closing/opening elements and registers movement events.