Description
Geovision GV-CS1320 2MP H.264 Camera Access Controller with a built-in Reader
GV-CS1320 is an access controller with a built?in 2 MP camera and 13.56MHz reader. GV-CS1320 recognizes identification cards and grants access to up to 40,000 users accordingly. With the integration of the wide angle camera, the Card and Face Mode enables GV-CS1320 to perform face detection together with card verification before access can be granted. Visitors requesting entry permits can use the touch pad to be granted access. There are 3 types of notifications the operators can receive to grant access. GV-ASNotify Program: When GV-CS1320 is connected to GV-ASManager over the network, GV-ASNotify generates a notification message and snapshot whenever the touch pad is activated. The operator can use GV-ASNotify to watch live view and communicate with the surveillance site via the microphone and speaker functions. GV-Access Mobile App: Similarly, the operator can launch mobile app GV-Access to enable live view and voice communication with visitors at the door before permitting entry. After adding GV-ASManager to GV-Access, the operator will get an alert notification upon the trigger of the touch pad. VoIP Calls: When the touch pad is activated, GV-CS1320 will place a call to the operator through the Internet using VoIP. The operator can then communicate with the visitor and enter the access code to open the door. The all-in-one solution eliminates the need of installing and maintaining a separate camera in addition to the card reader and a door entry system.
Key Features:
- 2MP progressive scan super low lux CMOS
- Minimum illumination at 0.02 lux
- Dual streams from H.264 and MJPEG
- Up to 15 fps at 1920 x 1080
- Day and night function (with removable IR-cut filter)
- Built-in IR with effective distance up to 3 m (9.84ft)
- Ingress protection (IP66)
- DC 12V, 2.5A / PoE+ (IEEE 802.3at)
- Built-in microphone and speaker
- Wide Dynamic Range (WDR)
- Built-in micro SD card slot
- Provides 180° panorama view
- ONVIF (Profile S, C) conformant
- Built-in 13.56MHz Reader (Mifare DESFire, MIFARE Plus and MIFARE Classic)
- Support for GV-Proximity Cards with GID (Geovision Identifier) to enhance security
- Access by card plus face detection
- RS-485 and network interface for connecting up to 2 readers
- Enabling different access control modes according to the Authentication Schedule: Card only mode (default), Card and Face Mode
- 1 door (one-way and two-way control)
- Bell button (touch pad) for talk mode
- Receiving live view and capturing snapshots when card is presented
- Anti-Passback (APB) support
- 2 inputs, dry contact (Door Sensor / Exit Button)
- 1 relay outputs (30V DC, 0.5A)
- Support for GV-I/O Box 4 Ports for sensor, alarm application and door bell activation
SKU: 84-CS13200-0010
